Centre Working Frequency(kHz): | 1MHz±2% | Maxim Operating Voltage (-6dB): | <200V |
Operating Temperature: | 1.6MPa | Maxim Pressure: | 6° |
The Material Of The Housing: | PPS | Protection Class: | IP68 |
High Light: | ultrasonic flow rate sensor , high frequency ultrasonic sensor |
High power 1MHz ultrasonic flow sensor for liquid flowrate measurement
Flowmeter suitable for most types and sizes of plastic tubing available on the market
Multiple off-the-shelf standard sizes for various tubing dimensions
Sensor solutions for tubing materials, such as PVC, silicone, PFA, PTFE, etc.
Signal processing
Complete electronic signal processing unit integrated into the sensor body
No external electronis board or display required
Configurable current, frequency or pulse output
Flow Sensor Applications
Chemical spray systems
Slurry lines
Dosing systems
Bioprocessing
Pump protection
Lab use

Parameters
Model | TL1000KA |
Centre working frequency (kHz) | 1.00MHZ±2% |
Bandwidth (-6dB) | 25% |
overall sensitivity 0 dB=3 Vp-p; cycle:5; distance:8cm (transmitter and receiver) | -7dB min |
Distance measure range | 1.0m |
Blind zone | 3cm |
Beam angle(-3dBfull angle) | 6° |
electrostatic capacity | 1200PF±20% |
Minimal parallel impedance | 150Ω±30% |
Maxim operating voltage (Pulse Duty cycle ratio 2%) | <200V |
Operating temperature | 4~70℃ |
The material of the housing | PPS |
IP rate | IP68 |
Dimension

Testing curve
