3pins engine Oil pressure sensor Ceramic Capacitive Pressure Sensor 2bar 5bar 10bar 20bar 30bar 40bar 100bar
Corrosion resistance, impact resistance, high stability, high temperature resistance, low hysteresis
Working pressure range: 0.2MPa ~ 10MPa
Range selection: 0.2Mpa,0.5Mpa,1Mpa,2Mpa,4Mpa,7MPa,10Mpa
Operating temperature: -40℃ ~ 140℃
Supply voltage: 5-24V
Nonlinearity:< ±6%FS
Repeatability:< 1.0% FS
Full scale sensitivity:(△C)3-8pF
Hysteresis: ±0.1%FS
Response time:<5ms
Temperature characteristic: <0.01%FS /℃
Service life: more than 5 million pressure cycles
Working medium: air, oil, brake oil, gasoline, diesel, air conditioning refrigerant, etc
C. Applications :
Automotive oil sensor Automotive braking system
Automotive air conditioning system
New energy vehicle thermal management system
Automotive intake and exhaust system
Screw air compressor,
Variable frequency water pump system (water will affect the core capacity value,The core pressure surface to do special treatment)
Intelligent pressure cooker
Commercial variable frequency air conditioning
D.Part number
PS: TM-NTY21010 ,TM-NTF010 ,TM-NTYW21010 ,TM-NTY18010
TM-NT: Company brand
Y/F: Y : round Sensor
F : square Sensor,
YW : temperature pressure integrated Sensor
21: OD: 21mm
18: OD: 18mm
10: 10bar
1Mpa=10bar
Part No. | Rang (MPa) | Overload pressure (MPa) | breakdown pressure (MPa) | Measuring capacitance (pF) | Shielding capacitance (pF) | Full scale capacity variation range (pF) | Remark |
NTY21002 | 0.2 | 0.36 | 0.56 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21005 | 0.5 | 0.9 | 1.35 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21007 | 0.7 | 1.2 | 2.05 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21010 | 1.0 | 1.8 | 2.5 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21015 | 1.5 | 2.7 | 3.75 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21020 | 2.0 | 3.5 | 5.0 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21030 | 3.0 | 4.8 | 7.4 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY21040 | 4.0 | 6.0 | 9.5 | 22±3 | 12±3 | 5.5±2 |
|
NTY21070 | 7.0 | 10.5 | 17.5 | 22±3 | 12±3 | 5.5±2 |
|
NTY21100 | 10.0 | 15.0 | 24.0 | 22±3 | 12±3 | 5.5±2 |
|
NTF010 | 1.0 | 1.7 | 2.5 | 12±2 | 8.5±2.5 | 4±2 |
|
NTF020 | 2.0 | 3.2 | 5.0 | 12±2 | 8.5±2.5 | 4±2 |
|
NTF030 | 3.0 | 4.5 | 6.8 | 12±2 | 8.5±2.5 | 4±2 |
|
NTF040 | 4.0 | 6.0 | 9.0 | 12±2 | 8.5±2.5 | 4±2 |
|
NTY18007 | 0.7 | 1.2 | 2.0 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY18010 | 1.0 | 1.8 | 2.5 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY18015 | 1.5 | 2.5 | 3.75 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY18020 | 2.0 | 3.2 | 5.0 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY18030 | 3.0 | 4.5 | 7.5 | 22±3 | 12±3 | 5.5±2.5 |
|
NTY18040 | 4.0 | 6.0 | 9.5 | 22±3 | 12±3 | 5.5±2.5 |
|
NTYW21005 | 0.5 | 0.9 | 1.35 | 22±3 | 12±3 | 5.5±2.5 |
|
NTYW21010 | 1.0 | 1.7 | 2.5 | 22±3 | 12±3 | 5.5±2.5 |
|
NTYW21040 | 4.0 | 6.0 | 9.5 | 22±3 | 12±3 | 5.5±2.5 |
|
E.SIZE UNIT: (MM)
1Mpa=10bar
1: Round (diameter 21 mm)
| D1 (mm) | D2 (mm) | D3 (R/mm) | D4 (mm) | T1 (mm) | T2 (mm) |
0.2Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.16±0.08 | 1.3±0.2 |
0.5Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.23±0.08 | 1.3±0.2 |
0.7Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.25±0.08 | 1.3±0.2 |
1Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.33±0.08 | 1.3±0.2 |
1.5Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.42±0.08 | 1.3±0.2 |
2Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.46±0.08 | 1.3±0.2 |
3Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.58±0.08 | 1.3±0.2 |
4Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.68±0.08 | 1.3±0.2 |
7Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.89±0.08 | 1.3±0.2 |
10Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.05 | 4.99±0.08 | 1.3±0.2 |
Suggestion: The inner diameter of the sealed O-ring should be greater than 14.5 mm
2: Round (diameter 18 mm)
| D1 (mm) | D2 (mm) | D3 (R/mm) | D4 (mm) | T1 (mm) | T2 (mm) |
0.7Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.67±0.08 | 1.8±0.2 |
1Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.70±0.08 | 1.8±0.2 |
1.5Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.78±0.08 | 1.8±0.2 |
2Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.84±0.08 | 1.8±0.2 |
3Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 3.93±0.08 | 1.8±0.2 |
4Mpa | 18.00±0.18 | 0.65±0.08 | 6.53±0.2 | 1.28±0.2 | 4.02±0.08 | 1.8±0.2 |
Suggestion:
The inner diameter of the sealed O-ring should be greater than 12.0 mm
3: Warm pressure type (diameter 21 mm)
| D1 (mm) | D2 (mm) | D3 (R/mm) | D4 (mm) | T1 (mm) | T2 (mm) |
0.5Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.23±0.08 | 1.3±0.2 |
1Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.33±0.08 | 1.3±0.2 |
4Mpa | 21.00±0.18 | 0.65±0.08 | 7.62±0.2 | 1.5±0.2 | 4.68±0.08 | 1.3±0.2 |
Suggestion: The inner diameter of the sealed O-ring should be greater than 13.0 mm
4:Square
| L1/(mm) | L2/(mm) | L3/(mm) | T1/(mm) | D2/(mm) | D3/(mm) | D4/(mm) |
1Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.3±0.08 | 0.5 | 1.4 | 1.6 |
2Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.36±0.08 | 0.5 | 1.4 | 1.6 |
3Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.44±0.08 | 0.5 | 1.4 | 1.6 |
4Mpa | 14.7±0.15 | 12.4±0.15 | 12.7±0.1 | 2.48±0.08 | 0.5 | 1.4 | 1.6 |
Suggestion: The inner diameter of the sealed O-ring should be larger than 7.5mm and the outer diameter should be smaller than 12.0mm
F:
FAQ
1. Q: When can we get the reply? |
Any inquiries will be replied within 24 hours. |
2. Q: Can i have samples? |
A: Yes. Sample is surely ok. We can even send you free sample and you should only pay for the freight fee. |
3. Q: What about minimum order quantity? |
A: We have no limit for MOQ, so you can even buy only 1 piece. Welcome to buy sample to test first. |
4. Q: What about delivery time? |
A: We will send sample to you within 3 days. |
Production for big quantity needs 20 to 25 days. And it also depends on product and quantity. |
5. Q: What about terms of payment? |
A: Payment terms: T/T, west Union, Paypal and L/C etc. |
6. Q: How you will send the goods to us? |
A: We will send the goods to you by Air (DHL, Fedex, UPS, TNT) and Sea shipping etc. |
7. Q: Are you trading company or manufacturer ? |
A: We are in China buzzer manufactory |
8. Q: Do you support OEM and ODM services? |
A: Yes, surely support. we can customize products according to the drawing. |
9. Q: Can you provide driven circuit? |
A: Yes, of course sure. |
10. Q: Can you solve technical problems for us? |
A: Yes, Our Technical team will try our best to support you. |