Semi-Automatic Screen Printing Machine For Round Surface Of Glass Cosmetic Bottle

The barrel screen printing machine is suitable for printing large water barrels, mineral water barrels, chemical barrels, paint barrels, oil barrels and other barrel-shaped trademarks. The machine uses a frequency conversion motor and guide rail sliding printing control, the machine is more stable, higher precision, and lower noise.

1. The microcomputer controls the action of each function, with a high degree of automation and simple and convenient operation

2. Built-in four-digit automatic counter

3. It has printing functions such as round and tapered surfaces,

4. Printing stroke and speed are adjustable to meet different printing requirements

5. The worktable can be fine-tuned up and down, left and right, and plane swing angle, with high printing accuracy, convenient and fast adjustment

6. Pneumatic printing control and pressure adjustment system

7. Microcomputer system controller with stable and reliable performance

8. Clear liquid crystal display, showing the working status of the machine at any time

9. High-quality Korean sensors and perfect fault alarm system

10. Convenient foot switch, simple operation and convenient maintenance

11. High-quality alloy die-casting parts and wear-resistant imported bearing sleeves

12. Frequency conversion motor control can make the stop position more accurate

13. Independent printing and ink return speed control

14. Blow function of printing seat, can print softer products

15. The round and flat products have separate special fixtures

16. Guide rail type left and right sliding printing structure, printing is smoother and higher precision

17. Action mode selection: automatic|semi-automatic|manual

Machine parameters

Start mode: panel|foot switch

Up and down drive mode: pneumatic

Left and right drive mode: electric

Workpiece up and down stroke: 100MM

Left and right stroke: 1350mm

Maximum printing area: 1350mm (the length of the circumference or arc) * 400mm (width)

Printable diameter range: ￠20-￠410MM

Maximum printing length: 1350MM

Printing speed: 800-1000PCS/H

Power requirements: 220V 50/60HZ 500W

Air pressure requirement: 5-7BAR

Body size: 1850x1500x1450mm

Weight: 220KG