304 SS Powder Coating Batch Oven Electric Heating System 110V - 380V
Powder curing oven is a part of the powder coating system.
The workpiece surface of powder coating heating to the specified temperature and heat preservation corresponding time, melting, flow flat, curing .
Wall Panel | 150mm thick sandwich rock wool steel board, keeps the heat better and save energy. |
Floor Panel | 100mm thick sandwich rock wool board, optional |
Edge Covers | The edge covers are used for connecting the wall panels and makes the oven stronger and stable and also safe for workers. |
Thresholds | The upper and bottom thresholds are for a better seal effect, the container lock will locks on the thresholds, keep heat better and save energy. |
Hot Air Circulating Fan | 1 set CF-1.5A 0.37kw high temperature resisting fan supply power for the air circulates in the oven and save energy. Air flow capacity: 860-1095 m³/h Air pressure: 815-762 Pa Air speed: 2900 r/min |
Air Duct | The hot air circulates between inside of the oven and the air duct, make sure the temperature is equilibriumed in the oven. |
Heating System | 6 sets 2kw stainless steel electric heating tubes can make sure the enough heat for curing and safe operations during working. |
Electrical Control System | The control box including the switches: Power on/off, Fan, Temperature controller, Timer, Emergency Stop, alarm, temperature, timer etc |
Color | Usually the color is blue, but can be customized |
Packaging & Shipping
Small size electric oven will be delivered overall, after assembling the oven, will be packed with PE film and then load into the container.
Big size electric oven will be delievered by oven parts.All the parts will be packed with PE film and labeled with numbers and names.