UV Glue Curing Oven
UV system:
1. UV tube: 5.6KW*2 sets of UV mercury lamps, effective irradiation width is 600mm;
2. The main peak of UV lamp: 365nm;
3. The UV reflector adopts aluminum coating reflector; imported quartz glass underneath;
cooling system:
Use high-power fan to exhaust air cooling;
The electrical and control system of the machine:
1. Each group of lamps is individually controlled, with a lamp timer, and the main electrical appliances
adopt the Chint brand; the upper degree of the lamp box is adjustable as a whole;
2. Set the light-off delay cooling function and emergency stop switch;
3. The temperature display inside the machine; the peak temperature of the product surface
is less than 80℃
4. Using 380V power supply, the total power is about 8KW;
5. Shading treatment; no light leakage around the furnace body at the entrance and exit;
6. The conveyor belt stops, the light stops signal, the conveyor belt rotates, and the light turns on;
Machine structure:
1. Dimensions: 2000L (length) × 850W (width) × 1630H (height) mm; the main box length is 1000,
the inlet and outlet materials are shaded 400mm each, and the inlet and outlet heights are 200mm;
2. The machine shell is made by bending and welding 1.5mmSPCC cold rolled plate, and the
surface is sprayed with powder;