SPC Floor Dust Removal Machine with Perfect Surface Effect

Automatic SPC floor high-speed production line, the Tag01 of this production line is an automatic loading manipulator, with a grasp frequency of 15-18 pieces per minute, the function is to automatically grasp the floor, reduce labor. Tag02 is a dust removal machine, the function is to remove the dust on the board, so that the floor surface effect is more perfect, Tag03 is a hot air dryer, the function is to soften the board and remove the water mist on the board. Tag04 is a single roll coater whose function is to apply a primer to the SPC floor surface. Tag05 is a double head brush machine, the function is to brush paint into the SPC floor lines. Tag06 is a dual lamp UV dryer, the function is semi-curing paint, so that SPC floor has better curing effect. Tag07 is a single roll coating machine, to the SPC floor coated with a layer of paint (finish paint can increase the floor anti-fouling, scratch resistance, wear resistance, control gloss and other functions) Tag08 is a heating leveling machine, the function is to level the floor paint, make the floor surface more perfect, and control the floor surface gloss. Tag09 is a 6-lamp UV dryer with the function of fully curing floor paint. Tag10 is a belt conveyor that functions as an over-floor. Tag11 is a cold sink machine, the function is to make the floor cool faster, reduce the health of the floor, Tag12 is a hair dryer, the function is to dry the water on the surface of the floor. Tag13 is an automatic blanking manipulator with a grasping frequency of 15-18 pieces per minute. The function is to automatically grasp the floor and reduce labor.

The production line uses Schneider inverter and electronic components, Siemens motors, Mitsubishi servo system, Japan NSK bearings, the work is very efficient and stable, can produce 18 floors per minute, can produce 900 square meters of SPC floor per hour.