Apet/PE rigid film for Thermoforming
Product | APET/PE | Thickness | 450mic | |
Standard | YBB00232005-2015 | |||
Item | Specification | |||
Appearance | No wrinkle, no foreign matter, no perforation; Fisheye diameter > 1.3mm: none; Fisheye diameter≤ 1.3mm: no more than 3/100cm2 | |||
Width | ±2mm | |||
Thickness | 0.45±0.02mm | |||
Water Vapor Transmission | ≤2.8 g/(m2·24h) | |||
Oxygen Transmission | ≤20 cm3/(m2·24h·0.1MPa) | |||
Contraction rate | ±4% | |||
Heating Sealing Strength | ≥7N/15mm | |||
Tensile strength | MD:≥40.0MPa | |||
TD: ≥40.0MPa | ||||
Remainder of solvent | ≤10mg/m2 | |||
Core Diameter | 3inch(76mm) | |||
Storage Condition | 20+/-5℃, 50+/-10% R.H maximum up to one year. Keep in a cool and dry place and far from heat sorce, keep the package intact before using. |