Oil Heating Transformer Oil Purifier Double Stage High Efficient

Why Should Transformer Oil Be Filtered?

Transformer oil is the main insulation and cooling medium of oil-immersed transformers. Its electrical strength and chemical composition directly affect the performance of transformers. If the oil contains a small amount of water and impurities, the dielectric strength will be reduced; and the oil will be easily oxidized and deteriorated at high temperatures when it is in contact with oxygen. Therefore, the transformer oil should be filtered when the transformer is installed.

The Advantages of Sino-NSH Double-Stage Dielectric Oil Treatment Machine

1. On the basis of retaining all the advantages of the single-stage vacuum oil filter, a Roots vacuum booster system, a secondary high vacuum pumping system, and fast dehydration and degassing are added, which overcomes the exhaust of the vacuum oil filter when the vacuum degree is high One cycle is equivalent to the effect of two ordinary vacuum oil filters.

2. Duplex three-in-one protection device can automatically protect high and low oil levels, automatically defoam through infrared detection, automatic liquid level control, automatic constant temperature, automatic pressure protection, high degree of automation, and sensitive and reliable operation.

Sino-NSH Double-Stage Vacuum Oil Purifier Options

1. According to the needs of users, it can be equipped with PLC intelligent control, touch screen operation, and dynamic display.

2. Optional online moisture detector.

3. The frequency converter is optional, and the flow rate can be selected according to the needs.

4. Optional flow meter with accumulative function.

5. The structure of the whole machine can be made into mobile type, fixed type, trailer type (half shaft or double shaft), fully enclosed type, canopy type, canvas tent, and open type.

Precautions

1. The ambient temperature of the machine should be within the range of -25 to 45°C.

2. The altitude of the site will directly affect the vacuum of the machine, the higher the altitude, the lower the vacuum (negative value).

3. The oil to be treated should not be too dirty (that is, there are too many impurity particles in the oil), otherwise, it must be fully filtered with other filtering equipment (such as the plate and frame oil filter produced by our factory) to avoid affecting the degassing of the oil machine Efficiency or clogged filter elements affect the life of the oil machine.

Why is the transformer oil dehydration and filtration machine necessary?

The transformer oil vacuum treatment machine can quickly remove harmful components in the oil such as moisture, gas, and impurities in the transformer oil, improve the lubricating performance of the transformer oil, and reduce the rust or corrosion of the oil-using equipment caused by the excessive moisture or impurities in the transformer oil, Extend the service life of oil equipment.

Application Scenarios of the Transformer Oil Purification Machine

Insulating oil filtration machine is used in power plants, power stations, power companies, metallurgy, petrochemical, railway, and other industrial and mining enterprises to purify unqualified electrical insulating oil. It can also be used for vacuum pumping and vacuum drying of electrical equipment.

Parameter

Our Service

1. 1 years warranty.

2. Provide customers with all technical drawings, materials of equipment purchased, and long-term technical consultation for free.

3. Strictly according to customer needs, provide customers with the best oil treatment solutions, and provide good performance products.

4. Ensure that the equipment is provided with perfect processing technology, perfect testing means, and equipment performance is good.

Other Models Purifier Machines

Sino-NSH cooperated with SIEMENS in Egypt Programme