High Shear Vacuum Emulsifier Mixing Reactor Face Cream Body Lotion Cosmetic Vacuum Homogenizer Mixer

In the manufacturing process of creams, ointments, and emulsions, the stability of the emulsion and the appearance of the product are crucial. However, high-viscosity emulsions usually face two major challenges: large particle size and air mixing during stirring. Large particle size causes the emulsion to be unstable and lose its gloss, while air mixing in the product will cause bubbles, bacterial contamination, easy oxidation and rough appearance.

To solve these problems, the ZJR series vacuum homogenization emulsification unit came into being. The unit integrates three unique stirring methods: homogenizer, center blade stirring and scraping wall stirring. These stirring methods complement each other and together form an optimal stirring method to achieve a perfectly mixed product.

The homogenizer is designed to homogenize the material through high pressure so that the particle size of the dispersed phase reaches the nanometer level, thereby greatly improving the stability and gloss of the emulsion. The center blade stirring generates strong shear force through rapid rotation, effectively preventing air from mixing into the product, avoiding bubbles and bacterial contamination. Scraping wall stirring ensures that the material is evenly distributed in the container and prevents the material from accumulating on the container wall, thereby improving the mixing efficiency and product quality.

Through the use of the ZJR series vacuum homogenizing emulsifier, the creams, ointments, and emulsions produced not only have stable emulsions and high gloss, but also can effectively avoid problems such as bubbling, bacterial contamination, and easy oxidation, ensuring the smooth appearance of the products. This innovative design of stirring method not only improves the quality and stability of the product, but also brings higher efficiency and reliability to the manufacturing process.

Specific parameter requirements of emulsifier:

Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg