Face Cream/Body Lotion/Cosmetic Ointment Vacuum Homogenizing Emulsifier/mixing Machine/mixer
Small vacuum homogeneous emulsifying machine is suitable for various type of ointment, honey products, small, pilot or a board, it is the cosmetics, pharmaceutical production enterprises laboratory indispensable experimental tool. Equipment has complete function, reliable quality.
This equipment is a set of vacuum deaeration, mixing, homogenizing, heating, electric control and other functions in one, equipment is composed by the vacuum homogenizing emulsifying pot, vacuum system, a lifting system. It is also according to the requirements of the production process supporting oil and water pot.
A vacuum homogenizing emulsifier is a piece of equipment commonly used in industries such as cosmetics, pharmaceuticals, and food to mix, blend, emulsify, and homogenize products. It operates under vacuum conditions, which can help prevent oxidation and improve product quality. The homogenizing process involves breaking down particles to create a uniform and stable mixture.
These machines typically consist of a vacuum chamber where ingredients are mixed and homogenized using high-speed rotating blades or a rotor-stator system. The vacuum helps remove air bubbles and reduces the chances of contamination.
Specific parameter requirements of emulsifier:
10L emulsifying pot | Specific parameters |
Enclosure material/thickness | 304L/3mm |
Inner Layer Material/Thickness | 316L/3 mm |
Sandwich material/thickness | 304L/3 mm |
Matching water phase pot | |
Enclosure material/thickness | 304L/3mm |
Inner Layer Material/Thickness | 316L/3 mm |
Sandwich material/thickness | 304L/3 mm |
Matching oil phase pot | |
Enclosure material/thickness | 304L/3mm |
Inner Layer Material/Thickness | 316L/3 mm |
Sandwich material/thickness | 304L/3 mm |
Design capacity | 10L |
Working capacity | 8L |
Enclosure material/thickness | 304L/Standard |
Inner Layer Material/Thickness | 316L/Standard |
Sandwich material/thickness | 304L/Standard |
Service life | Over 10 years |
Homogenizer power | 0.55 KW |
Homogenizer speed | 2800 |
Homogenization mode | Upper homogenization |
Lid opening method | Manual or electric |
Heating method | Electric heating |
Discharge method | Inclined discharge |
Sandwich operating pressure | 0.3 MPa |
Vacuum degree in the pot | -0.09 MPa |
Overall dimensions (m) | 0.8*0.55*1.43 |
Wearing parts | 1 year spare parts. spare parts |
Warranty Period | More than 1 year |
Installation and | The supplier is responsible for commissioning |
Matching water phase pot | |
Design capacity | 5L |
Working capacity | 4L |
Enclosure material/thickness | 304L/Standard |
Inner Layer Material/Thickness | 316L/Standard |
Sandwich material/thickness | 304L/Standard |
Sandwich operating pressure | 0.3 MPa |
Lid opening method | Movable lid opening |
Heating method | Electric heating |
Discharge method | Upper suction material |
Stirring mode | Down stirring |
Stirring power | 0.025 KW |
Stirring speed | 1440r/min |
Matching oil phase pot | |
Design capacity | 5L |
Working capacity | 4L |
Enclosure material/thickness | 304L/Standard |
Inner Layer Material/Thickness | 316L/Standard |
Sandwich material/thickness | 304L/Standard |
Lid opening method | Movable lid opening |
Heating method | Electric heating |
Discharge method | Upper suction material |
Stirring mode | Upper (lower) stirring |
Stirring power | 0.025 KW |
Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg