Vacuum Emulsifying mixer

Product description

Low speed mixing system

1.1 Two reversed low-speed mixing systems are composed of a hanging bracket full of scrapers as well as intermediate impeller.

1.2 The full automatic movable scraper’s surface is made of PTFE, only working under the condition with material. It’s easy for disassembly and cleaning.

1.3 Dynamic balancing coaxial shaft

1.4 Outer hanging brackets and inner impellers are made of stainless steel SUS316L.

1.5 The timing is controlled by PLC to facilitate the setting of working time. The mixer will not work if the time is not set.

1.6 The speed of the equipped reducer motor can be controlled directly by transducer to0-40 rpm.

· Capacity:800L
· Material: material contact part SS316L, material non-contact part SS304.
· Customized service: to provide and design total solution as per customer URS

Vacuum Emulsifying Machine including:
· Vacuum emulsifying main machine
· Pre-mixing tank for water and oil material
· Vacuum system
· Hydraulic system
· Control system
· Platform made from SS304

Vacuum emulsifying main machine:
· Slow mixer 0-40rpm with PTFE scraper
· Homogenizer 0-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket 0.3Mpa for steam (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
· Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.

Water and oil pre-mixing tank
· High shear mixer 960rpm or slow mixer 60rpm
· Heating by steam or electricity
· Pipeline for material transfer to main emulsifying machine

Vacuum system:
· Water ring type vacuum pump or oil type vacuum pump
· Safety valve for protecting the Water ring type vacuum pump

After finish one batch, customer can choose positive pressure or rotor pump for material out.