Inline high shear emulsifying homogenizing High Shear Emulsifying Pump

Pipeline High Shearing-rate Emulsifying Machine and Equipment

Emulsifying machine has head-end suction port, top discharging port and horizontal cantilever structure.

Sealing: mechanical seal with lower leakage and longer service life. Single end-face or twin end-face mechanical seal as choice according to different application, and the twin end-face mechanical seal can be connected to clean tap water directly.

Characteristics: Higher shearing force, faster emulsifying procedure, smaller distribution of particle sizes and better emulsifying stability.

Application of pipelined high shear emulsion pump:

Inline high shear mixer is usually installed in the bottom of the reactor or pipeline, the material go through form inlet to outlet, after high-speed shear.

This process could be done continuously or in circulation.

Pipeline high-cutting dispersal emulsification machine is high-capability equipment producing and circularly treating refined material. There are 1-3 groups of occlusal multilayer stators and rotors in the limited cavity. The rotors circumrotate in a high speed by the motor driving and bring driving suction, which draws the material into the cavity. In the least time, the material is dispersed, cut and emulsified. The distributing scale of gains becomes narrower.

The refined steady products are produced. The capability is large, so it is fit to continuously produce in the production line. The distributing scale of gains is narrow and it has high evenness, high efficiency, low-noise and saves time and energy resources and runs smoothly, so it can clear up the difference of the products of different batches.100% material is dispersed and cut, which has the capability of short-haul and low-lift feeding. It is used and repaired easily and can realize automatic control.