ZRJ-100L shower gel Industrial Vacuum Mixer with PLC control

Product description
The machine is composed of large vane mixer used for mixing materials of high viscosity and small strong cutting type homogenizing mixer for high speed mixing.
Scrapers are provided around vanes of the mixer. The material sticking to boiler wall can be effectively eliminated by the scrapers so as to realize sufficient blending of materials. Under the cutting, pressing and folding functions by two sets of reverse mixers, the scraped treatment fluids are mixed and will flow downwards to the position below the vessel where the homogenizing mixer can carry out pretreatment.
Performance and Feature:
1. Complex scpaer is suitable to every kind of complicated recipe and achieve optimizing effect.
2. PTFE scraping board caters to body of blending groove and scrape out viscosity material on boiler wall.
3. Homogenizer is installed on tank bottom to increase motor power more thoroughly and strongly. During few production, it can exert homogenizing effect fully.

Vacuum homogenizer mixer is composed of pre-mixing tank (water tank and oil tank), vacuum emulsifying tank, vacuum pump, hydraulic system, discharge system, electronic system and operating platform.

Vacuum emulsifying mixer series High shear homogenizer adopt most advanced technology for rotor and stator precise positioning, which is the core technology for emulsifying effect. The whole machine system adopts hydraulic lift style, frequency converter speed adjusting system, easy to operation and maintenance. The bi-direction material absorption system makes good homogenizing effect. This model is widely used in liquid chemical, cosmetics, food beverage, papermaking, daily products industry.
Vacuum emulsifying main machine:
· Slow mixer 10-40rpm with PTFE scraper
· Homogenizer 1150-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket 0.3Mpa for steam (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
· Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.
Water and oil pre-mixing tank
· High shear mixer 960rpm or slow mixer 60rpm
· Heating by steam or electricity
· Pipeline for material transfer to main emulsifying machine
Vacuum system:
· Water ring type vacuum pump or oil type vacuum pump
· Safety valve for protecting the Water ring type vacuum pump
After finish one batch, customer can choose positive pressure or rotor pump for material out.

NOTE: Due to make toothpaste, the motor power have different type, so pls contact us, we will choose a suitable machine for you. we have engineer work for toothpaste factory more than 10 year also have machinery design experience.