High Speed Vacuum Emulsifying Mixer Stable Mechanical Transmission

Vacuum Emulsifying Mixer Classification and structure:

The Vacuum Emulsifying Mixer has the advantages of fast mixing, mixing and emulsification, good emulsification effect and stable mechanical transmission.

The Vacuum Emulsifying Mixer is composed of a cylinder block, a stator, a rotor, a mechanical seal, an emulsification head, a motor, a frame and the like.

The process of emulsification compounding is the working principle of rapid centrifugal centrifugation using emulsification head. The material is subjected to rapid compression, stretching and shearing, so that the material is fully and optimally mixed.

The raw materials of the cylinder are made of SUS304. The inner and outer surfaces are treated. The joint between the stator and the shaft is assembled by mechanical seal, which is not leaking and reliable.

Vacuum Emulsifying Mixer Introduction

Vacuum Emulsifying Machine is suitable for cosmetic and pharmaceutical factory to making cream. It is including machine tank, oil tank, water tank, also with double jacket for heating. it can discharge from bottom valve.

Electric elements: Siemens products
Transducer: Panasonic Company
Button/switch: FUJI Company
Instruments and sensor are home high quality products.
It is possible to adjust and vision mixing speed, temperature of each jar, set upper limit and lower limit of temperature, control automatic valve. It is possible to set the time control for slow speed emulsifies mixing and control performance of lift of hydraulic system.

Vacuum Emulsifying Mixer Parameter

· Capacity:20L
· Material: material contact part SS316L, material non-contact part SS304.
· Customized service: to provide and design total solution as per customer URS
Vacuum Emulsifying Machine including:
· Vacuum emulsifying main machine
· Pre-mixing tank for water and oil material
· Vacuum system
· Hydraulic system
· Control system

Vacuum emulsifying main machine:

· Slow mixer 0-40rpm with PTFE scraper
· Homogenizer 0-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket electrical heating (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
· Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.

Vacuum Emulsifying Mixer Parameters