2019 nCoV Ag Saliva Rapid Test Cup

【SUMMARY】

The Rapid Test Cup is a rapid urine screening test that can be performed without the use of an instrument. The test utilizes monoclonal antibodies to selectively detect elevated levels of specific drugs

【Convenient Procedure】

1. Bring the pouch to room temperature before opening it. Remove the cup from the sealed pouch and use it within one hour.

2. Pull tab to remove cap, collect specimen in the cup and secure cap by pressing down on all three corners.

3. Check the temperature label (Temp Label) up to 4 minutes after specimen collection. A green color will appear to indicate the temperature of the urine specimen. The proper

range for an unadulterated specimen is 32-38°C (90-100°F).

4. Check the cap for a tight seal, date and initial the security seal label, then place it over the cap.

5. Remove one key from the kit, place the cup on a flat surface, and push the key into the socket of the cup to begin the test. Start timer.

6. Remove the peel off label covering the test results and wait for the colored line(s) to appear.

7. Read the adulteration strips between 3-5 minutes (when applicable) compare the colors on the adulteration pads to the enclosed color chart. If the specimen indicates

adulteration, refer to your Drug Free Policy for guidelines on adulterated specimens. We recommend not to interpret the drug test results and either retest the urine or collect

another specimen.

8. Read results at 5 minutes. Do not interpret results after 10 minutes.

MATERIALS AND COMPONENTS

Materials provided with the test

Materials required but not provided

• Timer

STORAGE AND STABILITY

• Store the test as packaged between 2-30°C.
• The Test stable until the expiration date printed on the outer packing, the product will be expired after 24 months.
• Do not use beyond the expiration date.
• Do not freeze any contents of the test
• The test must remain in the sealed pouch until use.

TEST PROCEDURE

Before test, please read the instructions carefully.

• Take the cassette to equilibrate to room temperature.
• Unpack the aluminum foil bag, take out the cassette.
• Insert the absorber end of the cassette into mouth. Make sure cassette is horizontal statement.

• Actively swab the inside of the mouth and tongue to collect oral fluid.
• Remove the absorber end from the mouth when the purple color move across the result window in the center of the test device.
• Wait for 10 minutes and read the results.

NOTE:

*When sampling, gently hold it in mouth and let saliva naturally adsorb on the sponge.

*Do not eat, drink, or smoke prior to the test for at least 30 Minutes.

*Any saliva specimen is appropriate for testing but the saliva specimen collected in the morning, before mouth rinsed, eating or drinking, is recommended

INTERPRETATION OF TEST RESULTS

This product can only perform qualitative analysis on the detection object.

Positive Result:

If both C and T lines are visible within 10 minutes, the test result is positive and valid.

Negative Result:

If test area (T line) has no color and the control area displays a colored line, the result is negative and valid

Invalid Result:

The test result is invalid if a colored line does not form in the control region. The sample must be re-tested, using a new test.

INTERNAL CONTROL

The test contains a built-in internal control in the test card. A color band appearing in the control region (C) is designed as an internal control. The appearance of the control line confirms that sufficient flow has occurred, and that the test card is working normally. If the control line does not appear within 10 minutes, it is considered an error in the test result and it is recommended to test again with the same sample and a new device.

LIMITATIONS

• The result of the test should not be taken as a confirmed diagnosis, for clinical reference only. Judgement should be made along with RT-PCR results, clinical symptoms, epidemiological information, and further clinical data.
• The Test performance depends on the amount of virus (antigen) in the sample and may or may not correlate with viral culture results performed on the same sample.

• The test must be equilibrated to room temperature (18℃~26℃) before used, otherwise the results may be incorrect
• A negative test result may occur if the level of antigen in a sample is below the detection limit of the test.
• Failure to follow the Test Procedure may adversely affect test performance and/or invalidate the test result.
• React less than 10 minutes may lead a false negative result; React more than 10 minutes may lead a false positive result.
• Positive test results do not rule out co-infections with other pathogens.
• Negative test results are not intended to rule in other viral or bacterial infections.
• Negative results should be treated as presumptive and confirmed with a molecular assay.
• Clinical performance was evaluated with fresh samples.
• Users should test specimens as quickly as possible after specimen collection.

PERFORMANCE CHARACTERISTIC

1. Clinical Verification

The performance of Test was established with 232 sample collected from symptomatic patients, who with symptoms onset within 7 days.

Positive results broken down by days since symptom onset:

Positive results broken down by CT value:

2. Limit of Detection

The experimental results show that for the virus culture concentration above 100 TCID50/mL, the positive rate of detection is greater than or equal to 95%. For the virus culture concentration of 50 TCID50/mL and below, the positive rate of detection is lower than 95%. So, the limit of detection of the Test Card is 100 TCID50/mL.

3. Cross-reactivity

Cross-reactivity of the test card was evaluated. The results showed no cross reactivity with the following specimen.

4. Interference Substances

The test results do not be interfered with the substance at the following concentration:

5. Precision

1. Test 10 replicates of negative and positive by using the reference materials of enterprises. The negative agreement and the positive agreement were 100%.

2. Test three different lots kits including positive and negative reference materials of enterprises. The negative results and the positive results were 100%

6. Hook Effect

The Test Card was tested up to 1.6 × 105 TCID50/ml of heat-inactivated 2019-nCoV strain and no high-dose effect was observed.

PRECAUTIONS

• For in vitro diagnostic use.
• Use appropriate precautions in the collection, handling, storage, and disposal of patient samples and used test contents.
• Use of Nitrile, Latex (or equivalent) gloves is recommended when handling patient samples.
• Do not reuse the used Test Card or saliva swab.
• Should never open the foil pouch of the Test Card exposing it to the ambient environment until the Test Card is ready for immediate use.
• Discard and do not use any damaged or dropped Test Card or material.
• Inadequate or inappropriate sample collection, storage, and transport may yield false test results.
• Sample collection and handling procedures require specific training and guidance.
• To obtain accurate results, do not use visually bloody or overly viscous samples.
• To obtain accurate results, an opened and exposed Test Card should not be used.
• Testing should be performed in an area with adequate ventilation.
• Wear suitable protective clothing, gloves, and eye/face protection when handling the contents of this test.
• Wash hands thoroughly after handling.

KEY TO SYMBOLS USED

		Materials Included			Test Cassette
		Instructions for Use			Date of
					Manufacturer
		Consult Instructions			Do Not Reuse
		For Use
		Store at 2°C~30°C			Catalogue Number
		Expiration Date			Keep away from Sunlight
		Manufacturer			Tests per Kit
		Lot Number			In Vitro Diagnostic Medical Device
		Keep Dry
		Guangzhou Decheng Biotechnology Co., LTD
		Room 218, Building 2, No.68, Nanxiang Road, Science City, Huangpu District, 510000, Guangzhou P.R.China
		TEL:+86-020-82557192
		sales@dochekbio.com
		www.dochekbio.com
	CMC Medical Devices & Drugs S.L.
	C/ Horacio Lengo Nº 18, CP 29006,
	Málaga, Spain