Automatic Barrier Gate Arm Can Be Left Or Right Oriented By Easy Refitting

DZ-138 servo barrier gate series, which researched developed and manufactured by our company, adopts international advanced technology, mechanical and electrical integrated design. Planetary gear drive, high torque, un-blocked, oil tight, no noise, automatically unlocked when the power is off, with 10 million operation times. The motor uses the DC 24V permanent magnet synchronous motor (PMSM motor), adjust to the global voltage, high-speed operation and rapid response, it will not overheat after 24 hours, frequent operation, speed time can be adjusted based on the vehicle flow and arm length, safe and reliable. The series servo barrier gate is free-debugging and free-maintenance, achieve the fully automated and intelligent, and the barrier arm open/close is fast and smooth, easy to use and safe.

Data sheet

​

Advanced Features

* Low-power servo motor, truly maintenance-free, high durability and energy saving.

* No position sensor, each stop with the same accuracy. Pair using is fully synchronized.

* No clutch device, boom will auto rise when power off (or unlock when power off, only use hand to lift the boom gently).

* No brake design, no longer to worry about the troubles from the wear of the brake pads and a series of reliability problems.

* Excellent waterproof, dust-proof performance, the whole product protection grade is IP65.

* Can work with DC24V battery, can be combined with solar energy, wind power, suitable places lack of AC power.

* Boom rise automatically when power off, comply with the fire safety requirements.

* Long time maintenance-free, greatly reducing maintenance costs.

* During the course of the movement without any mechanical impact or shock absorption, the highest reliability, the longest service life.

* Direction exchange is easy.

* Free debugging during production and installation, greatly reduce the maintenance and labor costs.

DZ Servo Control Board

Warning!

DZ SERVO controller is specially designed for the use of high speed, medium speed barrier gates. The configuration for most of the barrier gate systems can be accomplished by using a standard version controller. The position of the boom is continuously detected by the sensor. It replaces the limit switches used in conventional barrier control systems. The combination of the sensor and the controller unit possibly ensures the optimum control to the boom running

RFQ

Contact us for pricelist and catalog:
Sarah lee
Email:sarah@wonsunbarrier.com
Skype:lee72323
Whatsapp:+86 13751381783