Auto Close Intelligent Traffic Barrier Gate 80*100 Straight Boom


Traffic Barrier Gate Easy installation and maintenance reduce your labor costs.

A simple structure and no-limit switch design ensure easy installation and maintenance which reduces your labor cost.

Traffic Barrier Gate Heavy-duty and simple-design housing

The housing adopts a 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading in 5 years, conformed to the IP54 dustproof and waterproof, The Simple design also decorates your premises.

Traffic Barrier Gate Anti-collision protects boom arm (optional)

The anti-collision mechanism will protect the boom arm from being damaged once the boom arm collides with a vehicle.

Traffic Barrier Gate Safety--- Anti-hit by Loop Detector (Optional)

While the barrier boom is moving down, If a coming vehicle is detected to be existing on the ground induction coil, the arm will go back to a vertical position immediately until loop input is dismissed and then the arm will go down immediately.

Traffic Barrier Gate Safety--- Anti-hit by IR photocell (Optional)

While the arm moving down, If infrared transportation between the transmitter and receiver is blocked by a human or vehicle, the arm will go back to a vertical position immediately. The arm will automatically close once the infrared transportation recovers.

Traffic Barrier Gate Automatically close after the given time

Once this function is set to “ON”, the barrier will automatically close after a given time (1-90 seconds adjustable) if there is no vehicle passed after the barrier opens.

Traffic Barrier Gate Automatically Close by loop detector (Optional)

If a loop detector is installed, after the vehicle passes the barrier will automatically close once the loop input is triggered.

Traffic Barrier Gate Automatically open by loop detector (Optional)

If a loop detector is installed, when the barrier boom is in a horizontal position, the barrier boom will go up immediately once the loop input is triggered

Traffic Barrier Gate Manually control in case of no power.

Once the power is off, just open the cabinet and manually control the barrier with a gear mechanism. Also, barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlocked manually.