Specifications
Brand Name :
WONSUN
Model Number :
DZTP-128-B
Certification :
CE, ISO, SGS
Place of Origin :
Shenzhen,China
MOQ :
1PC
Price :
negotiation
Payment Terms :
T/T,Western Union,Money Gram, Trade Assurance,Paypal etc.,
Supply Ability :
1000 Sets/Month
Delivery Time :
3-7 working days after received your payment
Packaging Details :
Packed in bubble wrap firstly, and then reinforced with carton for outer packing.
Name :
Access Control 110 / 220V Vehicle Barrier Gate Parking Barrier Arm Gate
Open / closing time :
0.6s/1s/1.8s/3s/6s
Housing dimension :
280 * 240 * 996 mm
material :
2mm cold roll steel sheet
Mode of communication :
RS485
IP :
54
Description

Access Control 110 / 220V Vehicle Barrier Gate Parking Barrier Arm Gate

What are the disadvantages of Vehicle Barrier Gate barriers?

1. Special driving structure, no gears, non-belt driving, maintenance free, high stability, longer life.

2. Special balancing structure design makes the barrier arm have the features of slow-starting, fast-running, and slow-stopping.

3. It is running without arm-shaking.

4. The Vehicle Barrier Gate arm is 90 degrees running which excludes the failure caused by 360 degrees running.

5. Special low-speed aluminum housing motor integrated gearbox design, low noise, fast heat dissipation.

6. The Vehicle Barrier Gate driving mechanism has the design of an intelligent overheating protection system, in frequent use, it can control the warming of the motor, making the motor not burn easily.

7. The Vehicle Barrier Gate main engine adopts a mechanical limit switch and photoelectric limit switch dual protection, to avoid the problems caused by using a traditional magnetic switch which is easily interfered with by the external environment.

8. Vehicle Barrier Gate arm can be chosen from 1m to 6m.


Vehicle Barrier Gate Model Selection and Differences

Boom type Boom Length(L) Diameter of the spring(mm) Note
Straight boom 6M≥L≥5M 5.5/4.5
5M≥L≥4.5M 5.5 Dispatching 4.5
4.5M≥L≥3M 4.5 Dispatching 4.5
Straight boom adhesive tape 5M≥L≥4M 4.5M≥L≥3M 5.5/4.5 Dispatching 4.5
4M≥L≥3M 3.5M≥L≥3M 4.5 Dispatching 4.5
Folding boom 6M≥L≥5M 6.5/4.5
5M≥L≥4M 5.5/4.5
4M≥L≥3M 4.5
Two fence boom 5M≥L≥4M 6.5/5.5
Fence boom 4M≥L≥3M 5.5/4.5
Three fence boom 4M≥L≥3M 6.5/5.5
3M≥L≥2M 5.5/4.5


Vehicle Barrier Gate Specifications

Model

DZTP-128-B

Working Temperature

-40℃~+75℃

Voltage

220V±10%, 110V±10%, 50/60HZ

Rated power

80W

Relative humidity

≤90%

Remote control distance

≥30m

Net weight

48kgs

Speed

1S,1.8S,3S, 6S

Max boom length

6 meters

Motor Rotational speed

1400rmp

Protection Degree

IP54



Why choose us?


1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper Vehicle Barrier Gate voltage.
3. The surfaces of the system were destroyed by the wrong installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if there is any.
The explaining authority of this product instruction and service article belongs to the production factory.


Communication with customers

1) Q: Connected power and pressed open/close button but the traffic barrier gate did not action.

A

Reason

Solution

1

Fuse blown

Check the fuse and power in the controller

2

The battery of the remote control powered off

Change a new one

3

External protection circuit break or at protecting status

Open the barrier door and click the OPEN/CLOSE button on the control box

4

Same frequency interference

Check photocell and loop detector


2) Q: Connected power and press the open/close button, the traffic barrier gate will move but even when it is in the right position, the motor still runs and does not stop.

A

Reason

Solution

1

Limit switch

Adjust the horizontal/vertical limit switch to the correct position

2

Main controller failure

Change a new one


3) Q: The motor running but the traffic barrier gate arm is not in action?

A

Reason

Solution

1

Vehicle Barrier Gate arm at 45° position where is hard to move

Unlock the clutch and manually rotate the arm to a horizontal or vertical position then try again

2

The tension of the balancing spring is not suitable

Adjust spring exactly

3

Low working voltage

Check the voltage and power


4) Q: When opening/closing, traffic barrier gate arm cannot reach the right position (90° vertical & 180° horizontal)?

A.

Reason

Solution

1

Length adjustment of connecting rod not correct

Open the vehicle barrier gate door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm is at 180° horizontal position if the master rod and slave one are in the same straight line

2

Nuts on the limit switch loose

Tighten the nuts when the arm at 90° vertical and 180° horizontal position



Contact us for pricelist and catalog:


Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831

Send your message to this supplier
Send Now

Access Control 110 / 220V Vehicle Barrier Gate Parking Barrier Arm Gate

Ask Latest Price
Brand Name :
WONSUN
Model Number :
DZTP-128-B
Certification :
CE, ISO, SGS
Place of Origin :
Shenzhen,China
MOQ :
1PC
Price :
negotiation
Contact Supplier
Access Control 110 / 220V Vehicle Barrier Gate Parking Barrier Arm Gate
Access Control 110 / 220V Vehicle Barrier Gate Parking Barrier Arm Gate

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Verified Supplier
11 Years
guangdong, shenzhen
Since 2010
Business Type :
Manufacturer, Exporter, Seller
Total Annual :
50,000,00-60,000,00
Employee Number :
50~200
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement