RS485 Traffic Light Interface 24VDC Motor Vehicle Barrier Heavy Duty Car Park Barrier Two Motor Two Booms For Community

Product Overview:

Thank you for purchasing the 5^th generation brushless motor barrier gate from WONSUN. This product

adopts the latest mold design technology, mold die-casting manufacturing technology, brushless control

speed regulation technology, left and right interchangeable quickly, no clutch design, more reliable quality,

more convenient to use, the movement adopts two-stage worm gear drive, Three-curved connection rod

structure, and the arm works fast and stable. Easy maintenance and long service life.

Car Park Barrier Specification:

Car Park Barrier Advantages:

1. Speed adjustable from 2.5s to 6s
2. Arm direction change left or right
3. New design of antiskid device to make sure the safety.
4. All components of machine core upgraded to precision cast steel.
5. Auto-delay when closing(adjustable)
6 RS485 or CAN network communication interface(no need to install module)

Barrier arm balance adjustment

1,Please check and confirm arm status in horizon and vertical position,then tighten 2pcs M12 screw.

2,According to arm balance status, repeat adjusting the spring level of tightness of M8*140MM, make

sure the arm open and close in stable.

3,For the barrier gate with double springs,please adjust the two springs simultaneously.

4,If arm open and close shake too much, Please check below picture. Open arm shaking a lot means

spring is too tight, loose a little. Close arm

Packing List

Function setting parameter table

Electrical installation, wiring diagram

1. The internal wiring of this machine has been completed when it leaves the factory, please do not change it,

just connect the 220V power supply and the protective ground wire to work.

2. Traffic light interface: 2A 24V voltage traffic light use.

3. Infrared anti-smashing interface: external infrared anti-radiation device, and the switch signal of the anti-radiation

output can be connected.

4. Ground sense interface: support external ground sense. When using an external ground sensor, you only need to

connect the switch signal output by the ground sensor.

Product Maintenance

10.1 Keep the barrier gate clean
10.2 Check the joints ever month in case of any loose parts.
10.3 Check the spring elasticity after the barrier gate running 3000 times.
10.4 Check the easily worn-out parts(like the spring,limit switch),every half year and renew it.
10.5 Remote control distance will be shortened or not work in case like big object screening,battery
exhausting,extreme weathers.