Intelligent Barrier Gate Quick details:
working temperature:0.9sec to 8sec (adjustable)
Rated power:200W
Driving method:Servo motor
Protection grade:IP55
Max boom length(straight arm):3M-6M
Boom Type(meter) | Operation Time(seconds) | Boom Height(meter) |
80*45mm≥2.5m | 0.6S | 0.83m |
80*45mm≥3m | 0.9S | 0.83m |
100*45mm≥4.5m | 3S | 0.83m |
100*45mm≥6m | 6S | 0.83m |
80*45mm 90°boom≥3m | 1.8S | 0.83m |
80*45mm 90°boom≥3.5m | 3S | 0.83m |
80*45mm 90°boom≥5m | 6S | 0.83m |
80*45mm 180°boom≥3m | 1.8S | 0.83m |
80*45mm 180°boom≥4m | 6S | 0.83m |
80*45mm 180°boom≥5m | 6S | 0.83m |
100*45mm 2 fence boom≥3.5m | 3S | 0.83m, small vertical boom length is 0.8m, landing boom length 0.9m |
100*45mm 2 fence boom≥5m | 6S | 0.83m, small vertical boom length is 0.8m, landing boom length is 0.9m |
100*45mm 3 fence boom≥3m | 3S | 0.83m, small vertical boom length is 1.5m,landing boom length is 1.6m |
100*45mm 3 fence boom≥4m | 6S | 0.83m, small vertical boom length is 1.5m, landing boom length is 1.6m |
Tension spring select table of intelligent barrier gate
Boom type | Boom length | Selection spring | |
Type | Spec.(diameter x length) | ||
100*45straight, folding | 6m≦L<5m | Tension spring | 4.5+4.5+4.5 |
5m≤L≤4.5m | 4.5+4.5+4.5 | ||
4.5m<L≤3m | 4.5+4.5 | ||
80*45straight, folding | 6m≦L<5m | 4.0+4.0+4.0 | |
5m≤L≤4.5m | 4.0+4.0+4.0 | ||
4.5m<L≤3m | 4.0+4.0 | ||
2 fence boom | 5m≤L≥4m | 4.5+5.5+4.5 | |
4m<L≥3m | 4.5+4.5+4.5 | ||
3 fence boom | 4.5m≤L≥4m | 4.5+5.5+4.5 | |
4m<L≥3m | 4.5+4.5+4.5 |
(the parameter is based on the company’s arm)
1. Open and close speed adjustable
2. Arm direction Left and Right can change easily
3. When power off, manual open and close arm, and lock itself.
4. Wireless remote
5. Photocell I0 port output
6. Loop detector anti-collision I0 output
7. Open and close control input
8. 12V traffic light output
9. Traffic light signal output
10. Open and close limit signal output
11.Counting (fleet) input RS485 communication input
12. 24V battery input port
13. Delay close arm function(1-300 sec. Adjustable)
Disassemble step as below: put arm on vertical position
1. Unscrew the M8*140MM screw with a hexagonal spanner
2. Calibrate gate arm position
To calibrate the position of the barrier arm (for example, after applying excessive force), follow the steps below:
1. Open the door of the barrier box and remove the cover.
2. Loosen the two fastening screws of DZ-1 on the pendulum shaft with an M12 Allen key, so that the barrier
arm can be repositioned by hand.
3. Calibrate the position of the barrier arm (horizontal position, as shown in Figure 1).
4. Retighten the two fastening screws with a hex wrench
FAQ
1-Can you install using loop detector or pressure sensor on it?
Yes,the stanadard advertising barrier gate have loop detector and pressure sensor.
2-How about the guarantee and after sale service?
We have 1 year quality guarantee, We own well tranied and passional sales & aftersale services who can speak fluent English language.
3-How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10 working days longer.
4-How about the payment terms?
TT,western union,our company already joined the trade assurance,it will highly protect your order security.