Truck Fuel Monitor Global Positioning System Tracker Fuel Tank Level Sensor Fuel Level Temperature Sensor

Fuel tank monitor product description:

Model TUB ultrasonic fuel level sensor is installed on the bottom of the tank. Ultrasonic wave goes

from the bottom of the tank to the top of the fuel surface, reflects and goes back to the bottom.

The time it takes the sound burst to return to the sensor is measured and translated into a distance

measurement that can be converted into a level indication, volume measurement by the sensor.

Model TUB ultrasonic fuel level sensor is a perfect solution for monitoring the fuel level and fuel

consumption of commercial vehicles and also stationary tanks, etc.

The sensor can detect and report fuel theft in real-time by sending an alert. For the fuel level,

it is measured and sent to GPS tracker directly, then upload it to the server and processed to

display on your computer, mobile phone or tablet.

Automotive fuel rod actuator Key Features

• Perfect design to detect fuel tank without drilling holes.

• Accurate measurement of fuel level, same as capacitive fuel level sensor.

• Stable performance even in extreme temperature conditions with automatic

temperature compensation capability in range from -30℃ to 75℃

• Easy installation.

• IP67 protection.

1. Specifications

2. Installation

Product List

Important notes:

Ÿ Because the couplant and grease are forbidden materials for air transport, so you need to buy

these two materials from local shops before the installation.

Ÿ Do not wash the tank within 6 hours after installation.

Ÿ Do not install the sensor when the temperature is below minus 10 degrees.

Installation & Setting

Step 1: Check the current fuel level

Please check the fuel gauge or fuel tank directly if the balance fuel level is around or over 50%,

it is important for locating the installation spot and testing the sensor after installation.

Step 2: Find and clear the installation area

The sensor must be installed on the central area of the bottom of the fuel tank as per above figure.

Please clear this area completely before installation.

Application display of oil rod products:

QA:

Q: How to monitor vehicle fuel?
A: The VANWIN global positioning system fuel tracker can be integrated with GPS fuel sensors, ultrasonic fuel sensors, or probe fuel sensors. All collected fuel data should be uploaded to GPS tracking software for real-time monitoring of fuel consumption.

Q: Can it monitor the fuel usage of trucks?
A: Yes, it is. It improves the operation of truck fuel tanks to provide 99% accurate fuel consumption. Similarly, with the help of ultrasonic fuel sensors, it can also monitor the fuel usage of cars with irregular fuel tanks.

Q: My truck has 2 tanks, can it work?
A: Yes, it is. This device supports connection to up to 4 fuel sensors and monitors the fuel usage of each fuel tank. The fuel consumption data of each fuel tank should be clearly displayed on the web, accompanied by detailed reports for each fuel tank.

Q: Is there a report of refueling or leakage?
A: Yes, it is. The refueling/leakage report should accurately report the time and location of the addition or leakage.

Q: How can you support me? What is the warranty?
A: We provide real-time support through phone, email, and Whatsapp. Provide a 24 month warranty.

Q: Do you still provide fuel sensors?
A: Yes, it is. We mainly supply ultrasonic fuel level sensors. Cost competitive and easy to install.