AC DRIVE VFD Vector Control 2.2 KW 4KW 5.5KW Variable Frequency Inverters
VEIKONG hot selling VFD
As following is our hot selling VFD
VFD500M is high performance vector control mini vfd ( 220v 0.4kw-2.2kw; 380v 0.75kw-4kw)
VFD500 is high performacne general vfd (220v 0.4kw-2.2kw; 380v 0.75kw-710kw)
VFD550 is high perfromance special vfd with positional control.(220v 0.4kw-2.2kw; 380v 0.75kw-710kw)
VFD530 is high performance special vfd with lifting function, support 2 PID, support Synchronous and asynchronous motors (220v 0.4kw-2.2kw; 380v 0.75kw-710kw)
VFD500-PV solar pump inverter, connect with solar panels and pump for irrigation.(220v 0.75kw-2.2kw; 380v 0.75kw-160kw)
VK8000 is soft starter.(380v 5.5kw-500kw; 690v 11kw-500kw)
We also have other special vfd, special tension control vfd, special Electro-hydraulic servo injection molding vfd.
Features
1, With inside EMC C3 filter and building-block design for IO extension card and different kinds of PG card
2, Top performance in our industry which represent in torque in less than 1hz 0.5hz 0.25hz 0.1hz and 0hz
it can compare with any domestic chinese brand for output torque.
3, Smooth running and stability, support LCD keypad.
4, Low noise on motor and fast response for 0.1S acceleration and deceleration without dead zone
5, Reverse and forward free switching
6, Sleeping function and energy saving function as well as in built PLC programming
7, Tension control and torque mode control
8, Support two group motor parameters which can realize two motor switching control
Techincal Parameters:
Item | Specifiation |
Input | Inuput Voltage | 1phase/3phase 220V:200V~240V 3 phase 380V-480V:380V~480V |
| Allowed Voltage fluctuation range | -15%~10% |
| Input frequency | 50Hz / 60Hz,fluctuation less than 5% |
Output | Output Voltage | 3phase:0~input voltage |
| Overload capacity | General purpose application:60S for 150% of the rated current Light load application:60S for 120% of the rated current |
Control | Control mode | V/f control Sensorless flux vector control without PG card(SVC) Sensor speed flux vector control with PG card (VC) |
| Operating mode | Speed control,Torque control(SVC and VC) |
| Speed range | 1:100 (V/f) 1:200( SVC) 1:1000 (VC) |
| Speed control accuracy | ±0.5% (V/f) ±0.2% (SVC) ±0.02% (VC) |
| Speed response | 5Hz(V/f) 20Hz(SVC) 50Hz(VC) |
| frequency range | 0.00~600.00Hz(V/f) 0.00~200.00Hz(SVC) 0.00~400.00Hz(VC) |
| Input frequency resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.1% |
| Startup torque | 150%/0.5Hz(V/f) 180%/0.25Hz(SVC) 200%/0Hz(VC) |
| | |
VEIKONG VFD application:

VEIKONG VFD replace famous brands
