2% Voltage drop AC output Reactor choke for 3phase ac drive inverter

Description of Load Reactor:

VKS-OCL series Load Reactors are placed in series with electrical equipment to introduce a specific controlled impedance to the AC circuit. This series are applied at AC drive output side to suppress inrush voltage, reducing inrush and peak current, improving real power factor, restraining grid harmonics and improving the output current waveform. Line Reactor also known as Output Reactor.

1. High efficiency:
The battery with the same capacitance, higher efficiency, longer use time. Reliable inverter use the most advanced technology to raise the efficiency to 90%, save more energy, more environmental protection.

2. Protection systems:
Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection, Low Voltage protection alarm. Inverter comes with an LED light to indicate the problem.

Technical Data of AC reactor.

1, Rated Operating Power:φ3/380V/50Hz or 660V/50Hz;

2, Rated operating current:3Ato 2000A@40℃

3, Reactive Strength:Core-Winding 3000VAC/50Hz/10mA/10S Free

of arcing breakage (ftested in factory)

4, Insulation Resistance:1000VDC,insulation resistance≥100MΩ

5, Reactor’S noise is less than 65dB(to be measured at the point 1

meter away from the reactor horizontally)

6, Protection class:IP00

7, Insulation class:Above F

8, Standard: IEC289:1987 Reactor

GB10229-88 Reactor(equivalent to IEC289:

Benefits:

Obvious interference to other devices from power supply (such as interference, overvoltage) Interphase voltage is unbalanced >1.8% of rated voltage Low impedance line (Power transformer is about 10 times of rated data of inverter) Large quantity of inverter mounted on the same power line but have to minimize line current power factor calibrating capacitor or power factor correcting unit applied..

Product Parameters

Product Size