GPRS MPPT 5.5kw 7.5kw 11kw Single Phase three phase solar pump inverter

Product Details and Features:

VFD500-PV Seires High Performance Solar Pump Inverter

Power range: 0.75~75kw 220V

0.75~160kw 380V

1. MPPT with 99% high efficiency

2. Driving for AC induction motor or PMSM

3. GPRS remote monitoring and control

4. Long service life working and long warranty

5. Maximum DC power input: 450VDC for 220AC output /810VDC for 380V AC output

6. Easy install and operation, no need set parameters

7. Optional LCD keypad, no need use manual

8. A variety of protection, drying runing protection, water fulling protection, overvoltage protection, overcurrent protection

9. Built in PID function, when MPPT control, PID is also enable.

10. Connect DC and AC power, inverter can work 24 hours.

1. VEIKONG solar water pump system is essentially an electrical pump system in which the electricity is provided by one or several PhotoVoltaic (PV) panels. A typical solar powered pumping system consists of a solar panel array that powers an electric motor, which in turn powers a bore or surface pump.

2. What is solar pump inverter?

A solar inverter or PV inverter,solar pump inverter,solar pump controller,solar water pump inverter,solar pump drive,solar water pump controller,solar mppt vfd,solar mppt frequency inverter,solar frequency inverter,solar pump vsd,solar frequency inverter,solar vfd are all key words

IT is a type of electrical converter which converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network.

It is able to convert DC voltage coming from solar panels into AC voltage for powering any pump driven by a three-phase motor.

Pump speed is constantly adapted to available solar irradiation thus maximising the amount of pumped water and making possible operation even in conditions of low sunlight.

It also offers complete pump protection against surges, overloads and dry running.

Electrical Specifications and Power degree

Product Application

For 220V single phase motor connection

1: Single phase asynchronous motor wiring method (without starting capacitor):

Notice: U is connected to the common end of the starting winding and the working winding, V is connected to the starting winding, and W is connected to the working winding;

Single-phase asynchronous motor if the rotary steering is not correct, you can change the V and W wiring or set P22.13=1.

First solution: Set parameter P11.01=1 (Single phase motor type without capacitor) or second solution: set P00.11=31 if your motor frequency is 50 hz or set P00.11=32 if your motor frequency is 60HZ

For 220V single phase motor connection

2: Single-phase asynchronous motor wiring method (with capacitor)

Notice1: First solution: Connect motor cable to power terminal U and V and enter BSC mode to Set parameter P23.15=0(output phase loss shielding protection) or second solution: set macro P00.11=21 if your motor frequency is 50HZ or set P00.11=22 if your motor frequency is 60HZ