High Standard Vertical Bucket Elevator Conveyor Food Grade For Flour Mill / Sand

Working Principle

Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chain, on which above or below is a drive sprocket and a divert sprocket. Continuous Chain or Belt Bucket Elevator for Cement are generally equipped with chassis to prevent the dust flying into the bucket elevator.

Advantage

1. The elevator and electronic metering scale shall be used together,control circuit is used to control the position of the material,realizing automatic feeding and stopping function.
2. The elevator is made of stainless steel.
3.Bucket elevator adopts inflow feeding, gravity induced discharge, and use large capacity hopper.
4.The traction parts adopt wear-resistant chains and steel wire belt to extend the service life of the traction parts.
5.Bucket elevator runs smoothly, generally the lifting height is 40m or even higher.
6. Multiple discharges can be pneumatically controlled.
7. Vertical lifting can save floor space, and power loss is small, because the accumulation of material in the bucket, has been in a relatively static state during transport, it is not caused by transport damage.

Distinctive Features

1. High elevating efficiency: This elevator needs low driving power, adopting inflow feeding and induction unloading, without feeding back.
2. Wide usage: This machine requires less in materials’ species and property, not only can lift general powder and little particles, but high polishing materials.
3. Reliable operation: The advanced design and processing method assure whole machine’s reliability. This machine had been tested for non-fault time exceed 20000 hours.

4. Long service life: This elevator adopts inflow feeding and no need to excavating materials with hopper. So, there are less extrusion and collision between materials, which would reduce machinery abrasion.

Application

1. Metallic and non-metallic ores: bauxite, coal, sand, gravel cement, gypsum, limestone, etc.
2. Food products: sugar, flour, coffee, salt, etc.
3. Chemical processing products: fertilizers, phosphates, agricultural lime, soda ash, etc.
4. Pulp and paper products: wood chips.

Technical data

How to choose bucket elevator for you? Tell us the followings please:
1. What's material will be transported by bucket elevator? And the density of material? also the temperature of material? and its size.
2. How high is bucket elevator you need?
3. How much about the capacity of bucket elevator you need? 10t/h, 50t/h?
If there's anything I can do for you, Don't hesitate send us an inquiry now.