MachineU > China Products > Machinery > Other Machinery & Industry Equipment
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
Specifications
Brand Name :
LABTONE
Model Number :
EV222
Certification :
CE,ISO
Place of Origin :
CHINA
MOQ :
1set
Delivery Time :
45 working days
Packaging Details :
International Wooden case
Sine Force :
2400kg.f(24kN)
Random Force :
2200kg.f(22kN)
Shock Froce :
4400kg.f(44kN)
Displacement :
51mm
Max acceleration :
100g
Payload :
400kg
Max.Velocity :
2.0 m/s
Name :
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
Description

22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008

Principle Block Diagram of Equipment

A Vibration Test System consists of four major components (shown in Figure A-1):

  • Shaker
  • Power Amplifier
  • Cooling Blower
  • Measurement and Control System
    • Accelerometers and Cables
    • Charge Amplifier, depending on which type of accelerometers.
    • Control System, sometimes including DATA Analysis Software

Equipment Configuration

Item Configuration Qty.
1) Vibration shaker
A20S34 shaker (included Pneumatic Centering Controller) 1 set
B752S blower (included silencer and Duct ) 1 set
Head Expander VT80CM 1 set
Horizontal Slip table HG80M 1 set
2) Power Amplifier
LA20K Power amplifier(including Field power supply) 1 set
3)

Vibration Controller-Vcs-02

(Including Hardware and Control Functions Program software CDS
Accelerometer (Including Length 7m low noise BNC-M5 cable) 2 set
Computer(Including keyboard, mouse and monitor) 0 set
4)

Documentation

Operation Manual, Packing List

 1 set
5) Accessories
Maintenance Tools 1 set
Standard Spare Parts 1 set


Specification

Shaker Specifications
Peak Sine (Pk) 2400Kg.f peak (24KN)
Random (RMS) 2200Kg.f rms (22KN) @ISO5344
Shock (Pk) 4400Kg.f peak (44KN) @6ms
Usable Frequency DC～3000Hz
Maximum Displacement (p-p) 51mm (2inch)
Max. velocity 2m/s
Max. acceleration Sine:100g (980 m/s2)；Random: 60g (588 m/s2)
Vertical Load Support 400 kg

Body Suspension Natural

Frequency (Thrust Axis)

 Less than 2.5 Hz
Armature Diameter Ф340 mm
Armature Weight About 24kg

Fundamental Resonance

Frequency (Bare table)

 2,600 Hz (nom.) +/- 5%

Load Attachment

Points (Standard)

 21stainless steel M10 Inserts
Stray Flux Density ＜10gauss
Allowable partial force 500.N.M
Shaker dimensions 1190mmL×860mmD×1060mmH
Power Amplifier Specifications LA20K
Rated Output Capacity 22KVA
Signal to Noise Ratio Greater than 65 dB
Amplifier Efficiency Greater than 90%
Amplifier Overall Dimensions 650mmL×920mmD×1780mmH

Main Features


1) Rugged suspension system and linear motion guiding, strong carrying capacity, good guiding functions, high stability.
2) Load center airbag with high static stiffness and low dynamic stiffness, strong carrying capacity, perfect performance on amplitude variation.
3) High efficiency D class power switching, 3-sigma peak current, low power consumption and minimum harmonic distortion.
4) Quick self-diagnosis with safety interlock, high safety reliability
5) Airbag shock isolation device for vibration platform without the need of additional foundation, perfect reproduction of vibrational wave and reduction in vibration transmittance
6) Horizontal and vertical expansion platforms for different applications
7) Simple controller operation

Customer Services

Presales:

  • Technical consultation: test method, laboratory planning and suggestion.
  • Equipment selection: selection scheme, FAQ.
  • Product testing scheme.


In-Sales:

  • Customer communication and progress report.
  • Guidance for pre-installation preparation, equipment commissioning and test run.
  • Calibration (when Third Party’s verification is required).


After-Sales:

  • Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
  • Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
  • Technical support: special paid services are provided according to customer’s needs.


Detail Images:

22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008

22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008

Product tags

50 ohm step attenuator

,

electrodynamic shaker com

,

3 phase transformer calculator
Send your message to this supplier
Send Now

22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008

Ask Latest Price
Product Detail
Brand Name :
LABTONE
Model Number :
EV222
Certification :
CE,ISO
Place of Origin :
CHINA
MOQ :
1set
Delivery Time :
45 working days
Contact Supplier
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008

Labtone Test Equipment Co., Ltd

Verified Supplier
9 Years
guangdong, dongguan
Since 2002
Business Type :
Manufacturer
Main Products :
Vibration Test System, Vibration Testing Machine, Electrodynamic Vibration Shaker
Total Annual :
3 Million-5 Million
Employee Number :
50~100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Vibration Test System
MachineU China Products Machinery Other Machinery & Industry Equipment
Contact Supplier
Submit Requirement