Main Features

1. Drive power is small, the use of inflow feeding, induced discharge, large capacity of the hopper intensive arrangement, almost no material return and digging phenomenon when the material is lifted, so the ineffective power is less 2. The lifting range is wide, this kind of elevator has less requirements for the type and characteristics of the materials, which can not only improve the general powdery and small granular materials, but also improve the materials with large grinding, good sealing and less environmental pollution.

3. Good operation reliability, unique design principle and processing method, increase the reliability of the whole machine operation, trouble-free time more than 20,000 hours. High lifting height. The elevator runs smoothly, so it can achieve a high lifting height.

4. Long service life, the feed of the elevator takes the inflow type, there is no need to dig with a bucket, and there is rarely extrusion and collision between materials. The material is less scattered during feeding and unloading, which reduces mechanical wear.

Working principle

The hopper scoops the material from the storage below, and as the conveyor belt or chain is raised to the top, it flips down around the jacking wheel, and the bucket elevator dumps the material into the receiving tank. The transmission belt of the bucket elevator with transmission is generally made of rubber belt, which is installed on the transmission drum under or above and the reversing drum above and below. Chain driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprockets above or below, and a pair of directional sprockets below or above. Bucket elevators are generally equipped with a housing to prevent dust from flying in the bucket elevator.

Application