Product introduction

WLDH Horizontal Type Ribbon Mixer Blender For Pigments/Cosmetics

Ribbon mixer is a dry powder mixer with horizontal structure. The mixer has good mixing effect and more advantages than the vertical mixer, so it is widely used. Ribbon mixer is suitable for solid (powder) - solid (powder) mixing and solid (powder) - liquid mixing. Ribbon mixer is suitable for atmospheric operating environment. A direct drive drives the equipment, and a special torque-controlled coupling enables the machine to start at full load, preventing hazards caused by overload. According to customer requirements, the mixer can be designed into vacuum ribbon mixer, cooling ribbon mixer or heating jacket ribbon mixer. Mixing speed is fast, generally powder mixing takes about ten minutes. There are three discharging ways for you to choose: manual ribbon mixer, electric ribbon mixerand pneumatic ribbon mixer.

Technical specification

Features and economy

1. U-shaped barrel structure, smooth operation, uniform mixing, no dead Angle, clean discharge, wide application range.

2. Using inside and outside double-layer screw belt staggered mixing, mixing speed is fast, high uniformity

3. Bearing at both ends of mixer, material is not easy to enter, low maintenance rate.

4. The screw conveyor is easy to feed, the feed port is flush with the ground, and the feed is labor-saving and convenient.

5. The internal structure and overall design materials have passed ISO9001 international quality system certification.

Woking principle

Ribbon mixer is composed of driving mechanism, "u" type simplified, screw belt mixing mechanism, machine cover, bracket and discharging mechanism. The motor drives the screw belt mixing mechanism to rotate through the reducer, on the one hand, the material moves up and down, on the other hand, because of the advantages of the characteristics of the screw make the material internal and external convection, to achieve the purpose of full mixing, it has three kinds of standard mixing design a continuous screw belt, broken screw belt and blade, respectively according to the center or bottom discharge requirements to choose.

Ribbon mixer by the motor through the reducer drive special arrangement of screw belt spindle rotation, the external screw will move the material to the center but set, the internal screw will push the material to a certain position or end plate, both make the material for mutual diffusion, convection, shear, dislocation and radial motion, so that the material in a very short time to achieve uniform mixing effect. There are three standard stirring designs - continuous belt, discontinuous belt and blade designs are available. They are arranged according to center or bottom discharge requirements.