Multi Function Fine Powder Tumbler Screening Separator For Baobab Powder Processing
Product Introduction
The design of tumbler screening separator is a kind of high-efficiency screening machine specially designed to meet the requirements of large-volume, high-precision screening manufacturers. The simplest sieving is sieving with both eyes and hands. The tumbler screening separator is a mechanical simulation of this. It is currently the most effective simulation of the effective principle of manual screening motion (screening accuracy, efficiency, and screen life are all 5-10 times that of conventional round screens), and meets all fine and ultra-fine powder and particulate materials. , Especially suitable for materials that are difficult to handle.
Model | YS-1000/1200/1600/2000/2400/2600 | ||
Screen mesh area(m2) | 0.66-5.31 | ||
Frequency (r/min) | 220-280 | ||
Diameter(mm) | 1000-2600 or customized | ||
Leaning angle of screen (degree) | 0-10 | ||
Screen mesh | ≤1000 mesh | ||
Amplitude(mm) | 20-70 | ||
Power(KW) | 1.5-5.5 | ||
Layer(s) | According to demand | ||
Net clearing mode | Bounce ball clean,Swivel brush clean,Ultrasonic clean | ||
Structure material | Carbon Steel, SUS304, SUS316L |
Features
(1) up to 5 times the output per unit area;
(2) accurate to 6 levels of separation, screening efficiency as high as 90% to 99;
(3) using silicone rubber balls, ultrasonic and other high-efficiency cleaning device systems. The screen holes will not be blocked. Airtight dust removal, safe operation;
(4) acceleration is 4.5 times lower than that of vibrating screen. The service life of screening parts is increased and maintenance is reduced;
(5) noise is less than 75 decibels. Optimized rebalancing and low dynamic load on the foundation.
Structure principle
. The basic rotary motion is similar to manual screening. The eccentricity is adjustable from 25 to 40mm. Low speed V-belt drive is adjustable from 120 to 360rpm.
. The residence time of each product can be adjusted in the direction of the drive axis through the radial and cutting angle of the tumbler screening separator.
. Therefore establish horizontal and throwing three-dimensional rolling motion. The material is evenly dispersed on the entire screen surface from the center to the outer edge, so as to propagate axially in a spiral motion. The fine particles thus complete the entire screening process.
. The horizontal and vertical accelerations increase with the movement of the particles, and particles close to the mesh size are successfully separated; larger particles are transported to the outlet. The outlet is controlled by an adjustable guide device, which is another factor that controls the residence time of the material.
. This process is repeated between each screen layer.