Product introduction
Vertical Stainless Steel Bucket Hoist Grain Soybeans/Bucket Elevator Equipment
The TD bucket elevator produced by our company is suitable for conveying powdery, granular small pieces of non-abrasive or semi-abrasive bulk materials, such as moving part (hopper and traction belt), upper section with drive roller, lower section with tension roller, an intermediate casing, a driving device, a backstop brake, etc. ,it is suitable for conveying powdery, granular small pieces of non-grinding or semi-grinding loose materials upwards, such as coal, sand, coke, cement, water ore, etc.The characteristic of this machine is the rapid centrifugal discharge: it uses a belt as a traction member, so it is not suitable for conveying large blocks of material with high grinding and resistance.
The conveying capacity of TD bucket elevator is 3.1~66m3/h, and the height is 4~30m. In order to meet various requirements, this machine has a variety of manufacturing methods and installation methods.
.
Product parameter
Model | Size of material(mm) | Speed of Bucket (m/s) | Bucket Capacity (L) | Capacity (m3/h) |
TD-630 | 50-195 | 0.5 | 2.5-501.8 | 15-800 |
TD-500 | 50-195 | 2.5-501.8 | 15-800 | |
TD-400 | 50-195 | 2.5-501.8 | 15-800 | |
TD-315 | 50-195 | 2.5-501.8 | 15-800 | |
TD-250 | 50-195 | 2.5-501.8 | 15-800 | |
TD-160 | 50-195 | 2.5-501.8 | 15-800 | |
More model can be customized |
Main Features
1. Small driving power. The use of inflow feeding, induced unloading, large capacity hopper intensive layout, almost no material return and digging phenomenon when the material lifting, so less ineffective power.
2. Wide range of promotion. This kind of elevator on the type of materials, characteristics of less requirements, not only can improve the general powder, small granular materials, but also can improve the grinding of large material, good sealing, less environmental pollution.
3, Smooth operation. The design principle and processing method of the machine, the operation of the machine, trouble-free time more than 20,000 hours. The lifting degree is high, the elevator runs smoothly, so it can reach a higher lifting height.
4, Long service life. Elevator feed to take the inflow type, no need to use bucket digging material, rarely extrusion and collision phenomenon between materials. In the design of the material in feeding, unloading less scattered, reduce mechanical wear.
Application
This series bucket elevator is suitable for conveying powder, granulated and small lump of cut grinding and grinding cut small materials, such as coal, cement, stone, sand, clay and ore, etc., as a result of the elevator traction institutions is a circular chain, thus allowing conveying high temperature materials (material temperature not over 250 ℃). General conveyor height can reach 40 meters high.If you want to know more about the application of this product, please contact us.