Product introduction

Water-Cooled Spiral Screw Conveyor Vertical Elevator For Rubber Particles

XZCS series Vertical Elevator, using two vibration motor vibration, cross-mounted on the chassis, the whole machine is supported on the vibration isolation spring.

When the two cross-mounted vibration motors rotate in reverse, their unbalanced mass generates inertia force, and the inertia torque generated by the horizontal component causes the material to rotate around the axis. Vertical component inertia force makes the lifting machine move up and down, synthetic vibration makes the material to complete the lifting operation.

Product parameter

The following parameters are for reference only. We support customized different specifications of the elevator, to meet your specific use needs.

Uses and characteristics

This machine for all granular, block, powder solid materials can be transported, so it can be widely used in military, machinery, chemical, gold, mining, rubber, plastic, medicine and other industries of lifting equipment.

This machine has the advantages of simple design structure, easy installation and maintenance, small energy consumption, less floor space and saving investment.

Mainly used in the cooling process, to have a certain temperature of powder or granular materials and finished products cooling. And lift to the required height, continuous and uniform to the receiving device, both cooling machine, bucket elevator and feeder multiple effects.

The machine can complete the function of conveying materials from top to bottom or from bottom to top according to different technological requirements. Can be made into open and closed, lower vibration type and upper vibration type, seat type and hanging type, according to different requirements can complete the lifting of 10 meters below.

Selection guide

---

Vertical Elevator type selection guide:

1. material name, throughput, lifting height.

2. Material properties: including particle size and particle size composition, packing density, temperature, humidity, viscosity, flammability, corrosion, etc.

3. Working environment: open air, indoor, dry, humid, ambient temperature, etc.

4. Discharging method and discharging device form (can not be provided if not required).

5. Feeding method and feeding device form (can not be provided if not required).