Economic and efficient inclined belt chute conveyor Oil Acid Resistant Corrugated
Introduction
This machine is a continuously conveying equipment for loose bulk material such as coal, sand, stone, grain, etc and some powdered material, so its slope of application is very wide, including mine, cement plant, chemical industry, metallurgy and agriculture, electric power, light industry, grain, port, shipping ect, when the mateial need to be conveyor at a big inclined angle, the steeply inclinded belt conveyor also could conveying material vertically.
Application
Coal and wood-chip fired power stations
Underground mining (coal and ore)
Shaft conveying for tunnelling and underground mining
Steel industry
Ship loading and unloading, ship to ship loading
Sand preparation in foundry plants
Silo feeding
Slope conveying in open pit mining
Waste recycling, soil purification and water treatment
Handling of large material flows in the horizontal path
Technical Parameter
Belt Width (mm) | Height of Sidewall (mm) | Belt Speed (m/s) | Angle of Inclination (°) | Capacity (m³/h) |
500 | 80 | 0.8-2.0 | 30-90 | 84 |
100 | 112 | |||
120 | 98 | |||
650 | 100 | 0.8-2.0 | 156 | |
120 | 140 | |||
160 | 186 | |||
800 | 120 | 0.8-2.5 | 186 | |
160 | 318 | |||
200 | 360 | |||
1000 | 160 | 1.0-2.5 | 428 | |
200 | 483 | |||
240 | 683 | |||
1200 | 160 | 1.0-3.15 | 535 | |
200 | 765 | |||
240 | 1077 | |||
300 | 1358 | |||
1400 | 200 | 1.0-3.15 | 920 | |
240 | 1298 | |||
300 | 1657 | |||
400 | 2381 | |||
1600 | 200 | 1.25-3.15 | 1074 | |
240 | 1515 | |||
300 | 1953 | |||
400 | 2807 | |||
1800 | 240 | 1.25-4.0 | 2200 | |
300 | 2724 | |||
400 | 4106 | |||
500 | 5036 |
Capacity is under 30° angle and maximum belt speed.
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed:
| ♦ Top horizontal section length: m |
♦ Bulk density: t/m3 | ♦ Conveyor angle: ___° |
♦ Water content: % | ♦ Lifting height: ___m |
♦ Material temperature: °C | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Downstream equipment (what kind of equipment is used to feed the material): |
♦ Material is sticky or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Granule size of material: mm | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Max. Granule size: mm | ♦ Working environment: (indoor or outdoor) |
♦ Handling capacity: t/h | ♦ Working environment temperature: °C |
♦ Conveying length: m | ♦ Working power supply: 3 Phase V Hz |
♦ Bottom horizontal section length: m | ♦ Quantity: sets |
1.Greatly Strict Production And Quality Inspection
2.Perfectly Efficient And Safe Logistics Service
3.Absolutely Satisfying Post-Sale Service