Carbon Steel Belt Type Well Adapted Civil Engineering Bucket Elevator
Introduction
Carbon Steel Belt Type Well Adapted Civil Engineering Bucket Elevator is the upgraded from TH/TD bucket elevator. Bucket elevator consists of sprocket/drum, chain/belt, driven device, head section, middle casing and tail section etc. Carbon Steel Belt Type Well Adapted Civil Engineering Bucket Elevator can be widely used in several industries such as mining, mineral, chemical, agriculture, power, food and other industries etc.
Advantages and Features
1.to enhance a wide range of types of materials such hoist, the less performance requirements, not only can improve the general powdery, granular materials, but also enhance the abrasive material sealing the larger, less environmental pollution;
2.the drive power is small, the use into the feeder, induction discharge, large capacity hopper intensive layout almost no recycled material and digging material phenomenon in the material hoist, therefore less reactive power.;
3.long service life, improve feeder to take inflow style, without using excavating bucket, squeeze and collision phenomenon rarely occurs between materials. The machine was designed to ensure that the few scattered in the feed material, unloading, reducing mechanical wear and tear;
4.good operational reliability, advanced design principles and processing methods to ensure the reliability of the machine operation, no down time more than 20, 000 hours. Lifting height high. Smooth hoist operation, so you can upgrade to a higher level.
Technical Parameters
TZD type Silo Bucket Elevator | |||||||||||
Model | Belt Width (mm) | Head Pulley Diameter (mm) | Tail Pulley Diameter (mm) | Bucket Speed (m/s) | Head Shaft Rotation Speed (r/min) | Steel Bucket Volume (L) | Steel Bucket Spacing (mm) | Steel Bucket Capacity (t/h) | Plastic Bucket Volume (L) | Plastic Bucket Pitch (mm) | Plastic Bucket Capacity (t/h) |
TZD200 | 200 | 630 | 500 | 1.76 | 53.5 | 1.21 | 300 | 10 | 1.21 | 300 | 10 |
1.76 | 53.5 | 150 | 20 | 150 | 20 | ||||||
2 | 60 | 125 | 30 | 125 | 30 | ||||||
2.75 | 83.3 | 105 | 50 | 105 | 50 | ||||||
TZD250 | 250 | 630 | 500 | 1.76 | 53.3 | 2.35 | 150 | 30 | 2.35 | 150 | 30 |
1.76 | 53.3 | 125 | 50 | 125 | 50 | ||||||
2.42 | 73.5 | 125 | 80 | 125 | 80 | ||||||
3 | 91.9 | 125 | 100 | 125 | 100 | ||||||
TZD300 | 300 | 710 | 565 | 1.93 | 52.5 | 6 | 215 | 80 | 3.1 | 145 | 50 |
2.2 | 60 | 215 | 100 | 145 | 80 | ||||||
3.05 | 82.2 | 215 | 150 | 145 | 100 | ||||||
TZD400 | 400 | 710 | 565 | 1.93 | 52.5 | 8.4 | 215 | 100 | 6.1 | 195 | 80 |
2.2 | 60 | 215 | 150 | 195 | 100 | ||||||
3.05 | 82.2 | 215 | 200 | 195 | 150 | ||||||
TZD500 | 500 | 800 | 655 | 1.97 | 47 | 10.9 | 215 | 150 | 11.5 | 255 | 100 |
2.2 | 52.8 | 215 | 200 | 255 | 150 | ||||||
3.1 | 74 | 215 | 300 | 255 | 200 | ||||||
TZD650 | 650 | 800 | 655 | 2.2 | 52.8 | 2X6 | 215 | 200 | 2X3.1 | 145 | 150 |
2.76 | 66 | 215 | 300 | 145 | 200 | ||||||
3.87 | 92.5 | 215 | 400 | 145 | 300 | ||||||
TZD800 | 800 | 1140 | 930 | 2.5 | 41.6 | 2X8.4 | 215 | 400 | 2X6.1 | 195 | 200 |
3.15 | 52.5 | 215 | 500 | 195 | 300 | ||||||
3.94 | 66 | 215 | 600 | 195 | 400 |
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
♦ Granule size of material: mm | ♦ Working environment temperature: °C |
♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |