Powder Belt Bucket Elevator TDG Mining Efficient Rice Corn Soybean
Introduction
TDG mining efficient rice corn soybean belt bucket elevator for powder is the upgraded from TD bucket elevator. Bucket elevator consists of sprocket/drum, chain/belt, driven device, head section, middle casing and tail section etc. High Efficient Bucket Elevator can be widely used in several industries such as mining, mineral, chemical, agriculture, power, food and other industries etc.
Advantages and Features
1.to enhance a wide range of types of materials such hoist, the less performance requirements, not only can improve the general powdery, granular materials, but also enhance the abrasive material sealing the larger, less environmental pollution;
2.the drive power is small, the use into the feeder, induction discharge, large capacity hopper intensive layout almost no recycled material and digging material phenomenon in the material hoist, therefore less reactive power.;
3.long service life, improve feeder to take inflow style, without using excavating bucket, squeeze and collision phenomenon rarely occurs between materials. The machine was designed to ensure that the few scattered in the feed material, unloading, reducing mechanical wear and tear;
4.good operational reliability, advanced design principles and processing methods to ensure the reliability of the machine operation, no down time more than 20, 000 hours. Lifting height high. Smooth hoist operation, so you can upgrade to a higher level.
Technical Parameter
TDG Belt Bucket Elevator (Sh type bucket) | |||||||||||
Model | TDG 160 | TDG 200 | TDG 250 | TDG 315 | TDG 400 | TDG 500 | TDG 630 | TDG 800 | TDG 1000 | TDG 1200 | TDG 1600 |
Capacity (m3/h) | 32 | 45 | 72 | 101 | 158 | 220 | 348 | 492 | 788 | 1.22 | 1541 |
Bucket Volume (L) | 2.6 | 4 | 7 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
Bucket Spacing (mm) | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Weight of traction belt & bucket per meter (kg/m) | 22 | 21.5 | 33 | 33.2 | 42.2 | 62.3 | 78.53 | 106 | 145 | 155.5 | 223 |
Running Speed (m/s) | 1.2 | 1.2 | 1.34 | 1.34 | 1.5 | 1.5 | 1.68 | 1.65 | 1.86 | 1.86 | 1.86 |
Max. Lifting height (m) | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
Note: the capacity in the table is calculated according to 75% of the fill factor. |
TDG Belt Bucket Elevator (Zh type bucket) | |||||||||||
Model | TDG 160 | TDG 200 | TDG 250 | TDG 315 | TDG 400 | TDG 500 | TDG 630 | TDG 800 | TDG 1000 | TDG 1200 | TDG 1600 |
Capacity (m3/h) | 24 | 31 | 51 | 74 | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
Bucket Volume (L) | 1.9 | 2.9 | 4.6 | 7.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
Bucket Spacing (mm) | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Weight of traction belt & bucket per meter (kg/m) | 22 | 21.5 | 33 | 33.2 | 42.2 | 62.3 | 78.53 | 106 | 145 | 155.5 | 223 |
Running Speed (m/s) | 1.2 | 1.2 | 1.34 | 1.34 | 1.5 | 1.5 | 1.68 | 1.65 | 1.86 | 1.86 | 1.86 |
Max. Lifting height (m) | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
Note: the capacity in the table is calculated according to 75% of the fill factor. |
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
♦ Granule size of material: mm | ♦ Working environment temperature: °C |
♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |