Introduction
Slime Dehydrating Vibrating Sieve Shaker Classifier Vibrating Equipment has a wide variety of application including dewatering, desliming, degritting, rinsing, scrubbing and washing. It is made up of screen cloth, vibration exciter, supporting system and motor. Materials such as sand, gravel, crushed aggregates, sand, industrial sands, mineral sands, hard rock, precious metals, coal, iron ore, salt and other granular materials which can be processed by dewatering screens.
Working Principle and Application
To dewatering material effectively, damp material is feed onto a steep, downward inclined screen surface at the feed end of the dewatering Screen to achieve rapid drainage. A pool of water begins to form in the valley as material builds up on the slightly upward inclined surface. Counter rotating motors create a linear motion, driving solids uphill, while liquid drains through the screen media. The uphill slope of the screen, along with a discharge weir, creates a deep bed that acts as a filter medium, allowing retention of material much finer than the screen openings.
When the two vibrating motor that installed vertically on the dewatering screen rotate relatively, the eccentric block of two vibrating motors produce rated excitation force. The horizontal excitation force will cancel each other out; the vertical excitation force is transported to the whole screen surface through the body mass vibration.
Dewatering screen is widely used in coal industry, ore industry, electricity industry metallurgy industry, mining industry etc.
Advantages and Feathers
1. Less energy consumption,lower noise,longer service life
2. The beam and screen box are connected by high strength blot without welding
3. High accuracy screening efficiency,simple and stable structure, convenient maintenance
4. Suitable for rough screening with high capacity
5. Long travel distance for materials on the screen surface, high screening efficiency.
Technical Data
Model | Screen | Mesh | Feeding | Frequency | Amplitude | Motor | Power | Capacity |
ZSM1542 | 6 | 0.25-13 | ≤300 | 800 | 9-10 | Y160M-4 | 11 | 30-60 |
ZSM1556 | 8 | 13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 30-60 |
2ZSM1556 | 8 | U:13-50 | ≤300 | 800 | 11 | Y160L-4 | 15 | 30-60 |
ZSM1556B | 8 | 13-50 | ≤300 | 800 | 11 | Y132M-4 | 7.5×2 | 30-60 |
2ZSM1556B | 8 | U: 13-50 L:0.25-13 | ≤300 | 800 | 11 | Y132M-4 | 7.5×2 | 30-60 |
ZSM1756A | 9.5 | 13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 50-80 |
2ZSM1756 | 9.5 | U:13-50 L:0.25-13 | ≤300 | 800 | 10 | Y160L-4 | 15 | 50-80 |
ZSM1756B | 9.5 | 13-50 | ≤300 | 800 | 10 | Y132M-4 | 7.5×2 | 50-80 |
2ZSM1756B | 9.5 | U:13-50 L:0.25-13 | ≤300 | 800 | 10 | Y132M-4 | 7.5×2 | 50-80 |
ZSM1856 | 10 | 13-50 | ≤300 | 800 | 11 | Y160M-4 | 11 | 50-80 |
ZSM2065 | 13 | 13-50 | ≤300 | 800 | 11 | Y180M-4 | 18.5 | 70-100 |
2ZSM2065 | 13 | U:13-50 L:0.25-13 | ≤300 | 800 | 1 | Y180M-4 | 18.5 | 70-100 |
ZSM2065B | 13 | 13-50 | ≤300 | 800 | 9 | Y160L-4 | 11×2 | 70-100 |
2ZSM2065B | 13 | U:13-50 L:0.25-13 | ≤300 | 800 | 11 | Y160L-4 | 11×2 | 70-100 |
Selection Conditions
♦ Material to be processed: | ♦ Screen layer/deck/sieve number: |
♦ Bulk density: | ♦ Mesh size of every screen layer/deck/sieve: |
♦ Material Temperature: | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: | ♦ Working environment: |
♦ Max. granule size: | ♦ Working environment temperature: |
♦ Particle distribution percentage: | ♦ Working power supply: |
♦ Handling capacity: | ♦ Quantity: |