Wear Resistant Mining Stone Shaker Screen Separator Square Structure
Introduction
Wear resistant mining stone shaker screen separator mainly consists of the eccentric block vibrator, screen box, motor, and supportive device.
Through the flexible coupling, the motor drives the eccentric block of the vibrator at high rotary speed, generating the centrifugal force, and then causing the screen box did circular movement by the amplitude. After that, the materials in the slope screen surface will be cast continuously by the force generated from the screen box, then realizes the purpose of classifying.
Advantages and Feathers
♦ High screening efficiency, can be screened up to 200 mesh (0.074mm)
♦ Simple and convenient for changing and cleansing mesh screen
♦ Low noise and power consumption, easy maintenance
♦ Less blocking of mesh screen
♦ Automatic discharge of impurities and coarse materials, continuous operation
Technical Datas:
Type | Layer | Sieve Dimension (mm) | Sieve Mesh (mesh) | Particle Size(mm) | Capacity (t/h) | Power (kW) | Double Amplitude (mm) | Frequency (r.p.m) | Screen Angle (degree) |
ZS-520 | 1-5 | 500X2000 | 2-325 | <20mm | <5 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-525 | 1-5 | 500X2500 | 2-325 | <20mm | <8 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-612 | 1-5 | 600X1200 | 2-325 | <20mm | <3 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-1020 | 1-5 | 1000X2000 | 2-325 | <20mm | <12 | 0.75x2 | 6-10 | 1460/960 | 0-10 |
ZS-1025 | 1-5 | 1000X2500 | 2-325 | <20mm | <16 | 0.75x2 | 6-10 | 1460/960 | 0-10 |
ZS-1030 | 1-5 | 1000X3000 | 2-325 | <20mm | <20 | 1.1x2 | 6-10 | 1460/960 | 0-10 |
ZS-1224 | 1-5 | 1200X2400 | 2-325 | <20mm | <23 | 1.5x2 | 6-10 | 1460/960 | 0-10 |
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |