Introduction
TH Ring chain bucket conveyor also named double chain bucket elevator. Ring chain type uses forging ring chain as the traction component, compared with TD type belt bucket conveyor. It is widely used for bulk material which density less than 1.5t/m3, such as coal, cement, sand, fertilizer, food, etc.
Advantages and Features
Application widely.
Low driving power, low energy consumption.
The whole machine with full sealed design, no dust pollution while running.
The machine housing case has good-looking appearance.
Driving device configuration could save much space, light weight, with backstop, low noise, running steady.
Four kind bucket types could meet different particle size materials.
Customized lifting height
Technical Parameter
TH type Ring Chain Bucket Elevator | ||||||||||||||||||||
Model | TH160 | TH200 | TH250 | TH315 | TH400 | TH500 | TH630 | TH800 | TH1000 | TH1250 | ||||||||||
Bucket Type | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh |
Capacity (m³/h) | 15 | 25 | 18 | 29 | 31 | 48 | 35 | 60 | 60 | 94 | 75 | 118 | 114 | 185 | 146 | 235 | 125 | 365 | 396 | 613 |
Bucket Width (mm) | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | ||||||||||
Bucket Volume (L) | 1.2 | 1.9 | 1.5 | 2.5 | 3.0 | 4.6 | 3.75 | 6.0 | 5.9 | 9.5 | 9.3 | 15.0 | 14.6 | 23.6 | 23.3 | 37.5 | 37.5 | 58.3 | 59.4 | 92 |
Bucket Spacing (mm) | 500 | 512 | 688 | 920 | 864 | |||||||||||||||
Chain Diameter X Pitch (mm) | 14X50 | 18X64 | 22X86 | 26X92 | 30X108 | |||||||||||||||
Ring Number | 9 | 7 | 7 | 9 | 7 | |||||||||||||||
Chain Quantity | 2 | 2 | 2 | 2 | 2 | |||||||||||||||
Single chain broken load (kN) | ≥190 | ≥320 | ≥480 | ≥570 | ≥890 | |||||||||||||||
Bucket Speed (m/s) | 1.2 | 1.4 | 1.5 | 1.6 | ||||||||||||||||
Main sprocket diameter (mm) | 300 | 365 | 520 | 630 | 710 | 800 | 900 | 1000 | 1250 | 1250 | ||||||||||
Speed of main shaft (r/min) | 69.71 | 63.22 | 44.11 | 42.5 | 37.6 | 35.8 | 31.8 | 30.5 | 24.4 | 24.4 | ||||||||||
Max. Material particle size (mm) | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 65 | 70 | 75 |
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
♦ Granule size of material: mm | ♦ Working environment temperature: °C |
♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |
1.Greatly Strict Production And Quality Inspection
2.Perfectly Efficient And Safe Logistics Service
3.Absolutely Satisfying Post-Sale Service