Light Duty Small Inclined Corrugated Sidewall Apron Belt Conveyor for Light Material
Introduction
This machine is a continuously conveying equipment for loose bulk material such as coal, sand, stone, grain, etc and some powdered material, so its slope of application is very wide, including mine, cement plant, chemical industry, metallurgy and agriculture, electric power, light industry, grain, port, shipping ect, when the mateial need to be conveyor at a big inclined angle, the steeply inclinded belt conveyor also could conveying material vertically.
Advantages and Features
1. Using steeply inclined conveyor to convey loose bulk materials which can save a lots of spaces and lift material at the same time that ordinary belt conveyor can not reach.
2. It can transit stably from level to inclination.
3. Low energy consumption, easy construction and convenient maintenance.
4. Able to conveyor material at any angles up to 90 degree to save space for you.
5. Higher conveyance capacity.
6. Extremely high stability is provided in the traverse direction, good longitudinal flexibility.
7. High adhesive tape strength and long life.
Technical Parameter
Belt Width (mm) | Height of Sidewall (mm) | Belt Speed (m/s) | Angle of Inclination (°) | Capacity (m³/h) |
500 | 80 | 0.8-2.0 | 30-90 | 84 |
100 | 112 | |||
120 | 98 | |||
650 | 100 | 0.8-2.0 | 156 | |
120 | 140 | |||
160 | 186 | |||
800 | 120 | 0.8-2.5 | 186 | |
160 | 318 | |||
200 | 360 | |||
1000 | 160 | 1.0-2.5 | 428 | |
200 | 483 | |||
240 | 683 | |||
1200 | 160 | 1.0-3.15 | 535 | |
200 | 765 | |||
240 | 1077 | |||
300 | 1358 | |||
1400 | 200 | 1.0-3.15 | 920 | |
240 | 1298 | |||
300 | 1657 | |||
400 | 2381 | |||
1600 | 200 | 1.25-3.15 | 1074 | |
240 | 1515 | |||
300 | 1953 | |||
400 | 2807 | |||
1800 | 240 | 1.25-4.0 | 2200 | |
300 | 2724 | |||
400 | 4106 | |||
500 | 5036 |
Capacity is under 30° angle and maximum belt speed.
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed:
| ♦ Top horizontal section length: m |
♦ Bulk density: t/m3 | ♦ Conveyor angle: ___° |
♦ Water content: % | ♦ Lifting height: ___m |
♦ Material temperature: °C | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Downstream equipment (what kind of equipment is used to feed the material): |
♦ Material is sticky or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Granule size of material: mm | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Max. Granule size: mm | ♦ Working environment: (indoor or outdoor) |
♦ Handling capacity: t/h | ♦ Working environment temperature: °C |
♦ Conveying length: m | ♦ Working power supply: 3 Phase V Hz |
♦ Bottom horizontal section length: m | ♦ Quantity: sets |