NE Cereal Concrete Lifting Machine Bucket Elevator System 0.5m/s Speed
Introduction
Bucket elevator is suitable for vertical transmission of powder, granular and small block and less abrasive bulk materials, which has a small requirement for the type of materials, characteristics and block degrees.It can raise powder, granular and bulk materials, and abrasive materials such as grain, coal, cement, crushed ore, etc.
Advantages and Features
1. Bucket elevator has less requirement on materials, features and the bulk. It can lift, the powder, granular and bulk materials.
2. The max lifting capacity is 4,600m3/h.
3. Bucket elevator adopts inflow feeding, gravity induced discharge, and use large capacity hopper
4. The traction parts adopt wear-resistant chains and steel wire belt to extend the service life of the traction parts.
5. Bucket elevator runs smoothly, generally the lifting height is 40m or even higher.
6. The bottom part adopts automatic tension device against gravity, which can keep the tension constant and avoid slip or out-of-chain conditions, at the meantime, have certain yieldability that can effectively protect the moving parts when the hopper is blocked.
Technical Parameter
NE type Cement Bucket Elevator | |||||||||||
Model | NE15 | NE30 | NE50 | NE100 | NE150 | NE200 | NE300 | NE400 | NE500 | NE600 | NE800 |
Capacity (m3/h) | 15 | 32 | 60 | 110 | 170 | 210 | 320 | 380 | 470 | 600 | 800 |
Max. Particle Size (mm) | 40 | 55 | 60 | 70 | 90 | 100 | 125 | 130 | 140 | 150 | 165 |
Bucket Volume (L) | 2.5 | 7.8 | 15.7 | 35 | 52.2 | 84.6 | 127.5 | 182.5 | 260.9 | 330.2 | 501.8 |
Bucket Width (mm) | 250 | 300 | 300 | 400 | 600 | 600 | 600 | 700 | 700 | 700 | 800 |
Bucket Spacing (mm) | 203 | 305 | 305 | 400 | 400 | 500 | 500 | 600 | 700 | 700 | 800 |
Bucket Speed (m/s) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Max. Lifting Height (m) | 35 | 50 | 45 | 45 | 45 | 40 | 40 | 40 | 30 | 30 | 30 |
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed: _ | ♦ Lifting height (distance between inlet and outlet): m |
♦ Bulk density: t/m3 | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material temperature: °C | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is corrosive or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Material is sticky or not: (Yes or No) | ♦ Working environment: (indoor or outdoor) |
♦ Granule size of material: mm | ♦ Working environment temperature: °C |
♦ Max. Granule size: mm | ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |