Introduction
DJB steeply inclined belt conveyor is for material steeply conveying, comprising an endless corrugated sidewall conveyor belt, guide rollers around which the conveyor belt passes to define a conveying portion and a returning portion of the belt, spaced support idlers for supporting the returning portion of the conveyor belt, and a series of cross cleat on the conveyor surface for engaging material carried by the conveying portion of the belt to prevent conveyed materials from sliding down the conveyor belt on the incline.
Advantages and Features
1. No spillage with steep angle conveying, long lifespan.
2. Larger production grain sizes can be handled.
3. Reduced energy consumption to save money for you.
4. Able to conveyor material at any angles up to 90 degree to save space for you.
5. Higher conveyance capacity.
6. Extremely high stability is provided in the traverse direction, good longitudinal flexibility.
7. Low maintenance requirements.
Technical Parameter
Belt Width (mm) | Height of Sidewall (mm) | Belt Speed (m/s) | Angle of Inclination (°) | Capacity (m³/h) |
500 | 80 | 0.8-2.0 | 30-90 | 84 |
100 | 112 | |||
120 | 98 | |||
650 | 100 | 0.8-2.0 | 156 | |
120 | 140 | |||
160 | 186 | |||
800 | 120 | 0.8-2.5 | 186 | |
160 | 318 | |||
200 | 360 | |||
1000 | 160 | 1.0-2.5 | 428 | |
200 | 483 | |||
240 | 683 | |||
1200 | 160 | 1.0-3.15 | 535 | |
200 | 765 | |||
240 | 1077 | |||
300 | 1358 | |||
1400 | 200 | 1.0-3.15 | 920 | |
240 | 1298 | |||
300 | 1657 | |||
400 | 2381 | |||
1600 | 200 | 1.25-3.15 | 1074 | |
240 | 1515 | |||
300 | 1953 | |||
400 | 2807 | |||
1800 | 240 | 1.25-4.0 | 2200 | |
300 | 2724 | |||
400 | 4106 | |||
500 | 5036 |
Capacity is under 30° angle and maximum belt speed.
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed:
| ♦ Top horizontal section length: m |
♦ Bulk density: t/m3 | ♦ Conveyor angle: ___° |
♦ Water content: % | ♦ Lifting height: ___m |
♦ Material temperature: °C | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Downstream equipment (what kind of equipment is used to feed the material): |
♦ Material is sticky or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Granule size of material: mm | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Max. Granule size: mm | ♦ Working environment: (indoor or outdoor) |
♦ Handling capacity: t/h | ♦ Working environment temperature: °C |
♦ Conveying length: m | ♦ Working power supply: 3 Phase V Hz |
♦ Bottom horizontal section length: m | ♦ Quantity: sets |