MSW Handling Incline Chevron Belt Conveyor Rubber Belt Conveyor
Introduction
DTII fixed belt conveyor is the upgrade product from TD75, its adaptability is stronger, and be widely used. The operation temperature of belt conveyor is from -25ºC~40ºC, and request temperature of conveyed materials not exceed 60ºC; The heat resistance rubber belt can convey the high temperature materials that below 120ºC, the belt conveyor is not suitable for convey higher temperature materials. The oil-resistance, acid resistance rubber belt are used to convey acid, alkaline, oil materials and some materials with organic solvent.
Advantages and Features
1. The range of conveyed materials is widely. Wet, dry, powder, block materials and packaged product are can be used belt conveyor;
2.The capacity is large, the convey distance is length;
3.Multiple spot feeding and discharge can be realized in one belt conveyor;
4. Continue operation, running steady and small noise;
5. Simple structure, work reliable, easy operation, installation and maintenance.
Technical datas:
Roller form | Running speed(m/s) | Belt width (mm) | |||||
500 | 650 | 800 | 1000 | 1200 | 1400 | ||
capacity(m3/h) | |||||||
Trough roller | 0.8 | 78 | 130 | -- | -- | -- | -- |
1.0 | 97 | 164 | 278 | 435 | 655 | 891 | |
1.25 | 122 | 206 | 348 | 544 | 821 | 1115 | |
1.6 | 156 | 264 | 445 | 696 | 1048 | 1427 | |
2.0 | 191 | 323 | 546 | 853 | 1284 | 1748 | |
2.5 | 232 | 391 | 664 | 1033 | 1556 | 2118 | |
3.15 | -- | -- | 824 | 1233 | 1858 | 2528 | |
4.0 | -- | -- | -- | -- | 2202 | 2996 | |
Falt roller | 0.8 | 41 | 67 | 118 | -- | -- | -- |
1.0 | 52 | 88 | 147 | 230 | 345 | 469 | |
1.25 | 66 | 110 | 184 | 288 | 432 | 588 | |
1.6 | 84 | 142 | 236 | 368 | 558 | 753 | |
2.0 | 103 | 174 | 289 | 451 | 677 | 922 | |
2.5 | 125 | 211 | 350 | 546 | 821 | 1117 |
Selection Conditions
♦ Material to be processed:
| ♦ Installation angle: ___°(if the installation is inclined) |
♦ Bulk density: t/m3 | ♦ Lifting height: ___m (if there is slope angle) |
♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
♦ Conveying length: m | ♦ Quantity: sets |
♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |