Introduction
SUS304 Food Industry Three Layers Rice Bran Rotary Vibrating Sieve Shaker Screen can achieve outstanding screening, sieving,grading and filtering materials in powder, particle, mucilage form.adopts enclosed design, good sealing, zero dust pollution, environmental friendly. It is also as known as three dimensional screen because it can produce horizontal, vertical, inclined motions by adjusting the upper and lower eccentric weight.In addition,diameters are available in 600mm,800mm,1000mm,1200mm,1500mm,1800mm, 2000mm, which can fully meet different requirement of feeding rate.
Working Principle
The vibration is accomplished by eccentric weights on the upper and lower ends of the motion-generator shaft. The direction of the eccentric weights can change its rotational mode, rotation of the upper weight creates vibration in the horizontal plane, which causes material to move across the screen cloth to the periphery,while the lower weight acts to tilt the machine, causing vibration in the vertical and tangential planes. The trajectories of materials on the screen can be changed by adjusting the phase angle of upper and lower weights.
Application
Rotary vibrating sieve filter separator machine is widely used in food industry, ore, mining industry, chemical industry, medical industry, waste treatment, etc. Main functions are removing impurity, filtering, classification of material, solid-liquid separation, screening.
Advantages and Features
1. Ideal for screening, sieving,grading and filtering dry material and wet material
2. Reasonable and scientific package scheme is provided before shipping to save cost
3. Vibrating motor brand can be domestic or imported as per your requirement
4. A series of spare parts are suggested:screen cloth,rubber seal,bouncing ball,vibrating motor
5. Phase angle of heavy weights on both sides of vibrating motor can be adjusted to reach different capacity
6. Ultrasonic generator can be provided to improve the sieving efficiency and accuracy
7. Ideal for screening, sieving,grading and filtering dry material and wet material
8. Reasonable and scientific package scheme is provided before shipping to save cost
9. Customized solution is provided for individual demand
Technical Parameters
Model | Nominal Diameter(mm) | Screen Diameter(mm) | Screen Surface Area(m3) | Feeding size (mm) | Specification | NO. of Layers | Frequency(rpm) | Power(Kw) |
XZ-400 | 400 | 340 | 0.09 | <10 | 2-325 | 1-5 | 1500 | 0.18 |
XZ-600 | 600 | 530 | 0.22 | <10 | 0.25 | |||
XZ-800 | 800 | 720 | 0.4 | <20 | 0.55 | |||
XZ-1000 | 1000 | 900 | 0.63 | <20 | 0.75 | |||
XZ-1200 | 1200 | 1100 | 0.95 | <20 | 1.1 | |||
XZ-1500 | 1500 | 1400 | 1.5 | <20 | 1.5 | |||
XZ-1800 | 1800 | 1710 | 2.3 | <30 | 2.2 | |||
XZ-2000 | 2000 | 1910 | 2.86 | <30 | 3.7 |
Note: the parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
♦Material to be processed: _____ | ♦Max. granule size of the feeding material: _____mm |
♦Handling capacity (Ps. It means the total | ♦Layer number: ______ |
material capacity feeding from the inlet): _____t/h | ♦Mesh size of each layer: _____mm |
♦Bulk Density: _____t/m3 | ♦Particle distribution percentage:____________ |
♦Material temperature: _____ºC; | (please check the following example to help you |
♦water content:____% | understand it.Supposing the layer number is 2 |
♦Material is corrosive or not: ____ (Ps. Yes or No) | and the aperture size of each layer is 10mm and 5mm, |
♦Material is sticky or not: ____ (Ps. Yes or No) | then you will get 3 kinds of products: X,Y and Z. |
♦Working environment is indoor or outdoor: _____ | X≥10mm; 5mm≤ Y < 10mm; Z<5mm. |
♦Working environment temperature: ______ ºC | We want to confirm the following information: |
♦Upstream equipment (Ps. It means what kind of | 1)The percentage of X in the whole material:_____%; |
equipment is used to feed the material): _____ | 2)The percentage of Y in the whole material:_____%; |
♦Downstream equipment (Ps. It means what kind of | 3)The percentage of Z in the whole material:_____%;) |
equipment is used to discharge the material): _____ | ♦Working power supply: _____V ______HZ |