Introduction

Belt conveyor pulley is a mechanical device which can guides the belt running, changes the belt direction and tensions the belt etc. The length of the drum is selected: the goods of different widths should be selected for the width of the drum, under normal circumstances, "conveying material + 50mm". Pulley material and surface treatment: Determine the material and surface treatment of the drum (carbon steel galvanized, stainless steel, black or rubberized) according to the conveying environment..

Advantages and Features

1. Advanced welding capability ensures excellent quality of conveyor pulley.

2. Shell cylinders are rolled from the highest quality flat plate and longitudinally seam welded with a prepared full penetration butt weld.

3. Hub and end disc can be welded together or forged as one-piece depending on different types of pulley.

4. Pulley shells are finish machined and can be rubber lagged according to your requirements.

5. The dimension and tolerance of the pulleys also can be custom-made according to the drawing provided by you.

6. Dynamic balancing grade is very common for our engineered pulleys. No balance weight outside the end disc is available upon request.

7. There are different sizes and lagging types available for you.

Technical Parameter

Selection Conditions

♦Glue is covered or not: ___ (Yes or No)

♦Due to the different standards for rollers in different countries, we will very appreciate if you can provide us the corresponding layout drawing to normally install the roller with the matching equipment.

If can’t, please refer to the following picture and provide the core parameters for a better quote and production:

d ___mm; D ___mm; L ___mm; L1 ___mm; δ1 ___mm; δ2 ___mm

We mainly provide the following equipment: