SUS304 Rotary Vibration Separator Multilayer Round Pharmaceutical Vibration Sieve
Introduction
Round pharmaceutical vibration sieve adopts enclosed design, good sealing, zero dust pollution, environmental friendly. It is also as known as three dimensional screen because it can produce horizontal, vertical, inclined motions by adjusting the upper and lower eccentric weight.In addition,diameters are available in 600mm,800mm,1000mm,1200mm,1500mm,1800mm, 2000mm, which can fully meet different requirement of feeding rate. It can achieve outstanding screening, sieving,grading and filtering materials in powder, particle, mucilage form.
Advantages and Features
1. Vibrating motor brand can be domestic or imported as per your requirement
2. A series of spare parts are suggested:screen cloth,rubber seal,bouncing ball,vibrating motor
3. Phase angle of heavy weights on both sides of vibrating motor can be adjusted to reach different capacity
4. Ultrasonic generator can be provided to improve the sieving efficiency and accuracy
5. Ideal for screening, sieving,grading and filtering dry material and wet material
6. Reasonable and scientific package scheme is provided before shipping to save cost
7. Customized solution is provided for individual demand
Technical Parameters
Model | Nominal Diameter(mm) | Screen Diameter(mm) | Screen Surface Area(m3) | Feeding size (mm) | Specification | NO. of Layers | Frequency(rpm) | Power(Kw) |
XZ-400 | 400 | 340 | 0.09 | <10 | 2-325 | 1-5 | 1500 | 0.18 |
XZ-600 | 600 | 530 | 0.22 | <10 | 0.25 | |||
XZ-800 | 800 | 720 | 0.4 | <20 | 0.55 | |||
XZ-1000 | 1000 | 900 | 0.63 | <20 | 0.75 | |||
XZ-1200 | 1200 | 1100 | 0.95 | <20 | 1.1 | |||
XZ-1500 | 1500 | 1400 | 1.5 | <20 | 1.5 | |||
XZ-1800 | 1800 | 1710 | 2.3 | <30 | 2.2 | |||
XZ-2000 | 2000 | 1910 | 2.86 | <30 | 3.7 |
Note: the parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
♦Material to be processed: _____ | ♦Max. granule size of the feeding material: _____mm |
♦Handling capacity (Ps. It means the total | ♦Layer number: ______ |
material capacity feeding from the inlet): _____t/h | ♦Mesh size of each layer: _____mm |
♦Bulk Density: _____t/m3 | ♦Particle distribution percentage:____________ |
♦Material temperature: _____ºC; | (please check the following example to help you |
♦water content:____% | understand it.Supposing the layer number is 2 |
♦Material is corrosive or not: ____ (Ps. Yes or No) | and the aperture size of each layer is 10mm and 5mm, |
♦Material is sticky or not: ____ (Ps. Yes or No) | then you will get 3 kinds of products: X,Y and Z. |
♦Working environment is indoor or outdoor: _____ | X≥10mm; 5mm≤ Y < 10mm; Z<5mm. |
♦Working environment temperature: ______ ºC | We want to confirm the following information: |
♦Upstream equipment (Ps. It means what kind of | 1)The percentage of X in the whole material:_____%; |
equipment is used to feed the material): _____ | 2)The percentage of Y in the whole material:_____%; |
♦Downstream equipment (Ps. It means what kind of | 3)The percentage of Z in the whole material:_____%;) |
equipment is used to discharge the material): _____ | ♦Working power supply: _____V ______HZ |