Environmental Protection Equipment Conveyor Cover for Sustainable Mining in Limestone Yards

Introduction

The rain cover of the conveyor belt is a full corrugated cover. These covers are more rigid because of perpendicular corrugations. They are hinged for convenient viewing.

When compared to smooth covers, a corrugated design is naturally stronger. On its own, each channel (or rib) increases the bending strength of the entire cover. So think of each rib as a little muscle.

Features and Advantages

1. No installation supports needed to brace covers on conveyor.

2. Rigid, corrugated covers are infinitely stronger than smooth designs.

3. Conveyor cover installation is not dependent on the location of idlers.

4. Overlapped edges double thickness increases conveyor cover strength.

5. Waves on surface to increase the support force, even can withstand a person.

6. Conveyor cover protects belt conveyor free from rain, dust, sunshine, wind etc.

7. Galvanized steel plate or fiberglass construction material can be optional.

8. Symmetrical design allows easy placement, quick installation and safe access.

9. Openable conveyor cover designed with hinges and self-tapping screws.

10. Full style hinges of the conveyor covers are protected with rust free coating.

Technical Parameter

Note: All the parameters are for reference only, we can design and manufacture as per your requirements.

Selection Conditions

♦Thickness: ___mm (PS. We can customize the thickness according to the customer’s requirement as well as provide the common thickness of 0.5mm, 0.6mm and 0.8mm)

♦For it working with the belt conveyor, we will very appreciate if you can provide us the corresponding layout drawing to normally install it;

If can’t, please refer to the following picture and provide the core parameters for a better quote and production: L ___mm; H ___mm; R ___mm

We mainly provide the following equipment: