Conveyor Hood Easy Installation Color Coating Steel Conveyor Belt Covers

Introduction

The rain cover is suitable for belt width B500-B3000, and can also produce special shape rain cover according to customer requirements. The thickness of the color plate for rain cover is 0.5mm-1.0mm, and the material is colored steel plate, galvanized plate, stainless steel plate, etc.

The dust cover of the conveyor is light weight and high strength, the relative density is between 1.5 and 2.0, and the weight is only 1/4~1/5 of carbon steel, but the tensile strength is close to or even exceeds that of carbon steel.

Features and Advantages

1. No installation supports needed to brace covers on conveyor.

2. Rigid, corrugated covers are infinitely stronger than smooth designs.

3. Conveyor cover installation is not dependent on the location of idlers.

4. Overlapped edges double thickness increases conveyor cover strength.

5. Waves on surface to increase the support force, even can withstand a person.

6. Conveyor cover protects belt conveyor free from rain, dust, sunshine, wind etc.

7. Galvanized steel plate or fiberglass construction material can be optional.

8. Symmetrical design allows easy placement, quick installation and safe access.

9. Openable conveyor cover designed with hinges and self-tapping screws.

10. Full style hinges of the conveyor covers are protected with rust free coating.

Technical Parameter

Note: All the parameters are for reference only, we can design and manufacture as per your requirements.

Selection Conditions

♦Thickness: ___mm (PS. We can customize the thickness according to the customer’s requirement as well as provide the common thickness of 0.5mm, 0.6mm and 0.8mm)

♦For it working with the belt conveyor, we will very appreciate if you can provide us the corresponding layout drawing to normally install it;

If can’t, please refer to the following picture and provide the core parameters for a better quote and production: L ___mm; H ___mm; R ___mm

We mainly provide the following equipment: