Hopper Conveyor Feeding Rotary Drum Screen Trommel Sieve Separator for Diamond Ore
Introduction
Trommel screen has wide range of sizes and capacities,it is a mechanical screening machine used to separate materials.It consists of a perforated cylindrical drum that is normally elevated at an angle at the feed end,motor,reduction unit,screen frame and sealing cover.
Through the reasonable rotation of the center separation cylinder of the equipment that achieved by the transmission deceleration system, the self cleaning rotary drum screen machine start to work. The center separation cylinder a sieve composed of a plurality of ring shaped flat steel rings, which is tilt installed above the ground plane. In the work, the material enters into the cylinder from its top, then the cylinder rotating to screening materials. In the separation process, the fine materials separated from top to bottom by mesh interval circular flat steel, and the coarse materials from the separating device is discharged into the crusher.
Working Principle
Using excavator to feed raw material to the hopper, then, they flow into double trommel, big stones and pebble can be separated and flow outside of the equipment, mineral aggregate with gold whose diameter is less than 6mm can enter into the beneficiation sluice through inner trommel screen, there is a fixed and high extraction ratio gold felt sluice in one side of the beneficiation sluice to extract gold particle.
Technical Parameters
Model | Length Range | Segment No. | Aperture Size | Power (Kw) | Inclined Angle | Max. Material Size | Rotating Speed(rpm) |
GTSφ600 | 2-4m | 1-2 | 5-35mm | 2.2-3 | 0-7° | 50mm | 15-18 |
GTSφ800 | 2-5m | 1-3 | 5-40mm | 3-5.5 | 0-7° | 60mm | 15-18 |
GTSφ1000 | 2-6m | 1-4 | 5-50mm | 4-7.5 | 0-7° | 80mm | 15-18 |
GTSφ1200 | 3-8m | 1-4 | 5-60mm | 5.5-11 | 0-7° | 100mm | 15-18 |
GTSφ1500 | 3-10m | 1-5 | 5-60mm | 7.5-1 5 | 0-7° | 150mm | 15-18 |
GTSφ2000 | 4-12m | 1-5 | 5-75mm | 7.5-l 8.5 | 0-7° | 180mm | 15-18 |
GTSφ2500 | 5-12m | 1-6 | 5-90mm | 11-l 8.5 | 0-7° | 200mm | 15-18 |
Note: the parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
♦ Material to be processed:
| ♦ Screen deck/segment number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen deck/segment: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |