Chemical Vibrating Sieve Reciprocating Motion 75mm~90mm Amplitude
Introduction
Gyratory screen is a new developed equipment particularly for fine material.The main function is to provide accurate separation of materials, as well as resulting greater product yields at higher production rates.
Plane rotary screen machine is the most effective sieve screening equipment to simulate the principle of artificial sieve movement. The principle of plane rotary motion is adopted to reduce the basic load of the equipment. Meet all ultra-fine powder and granular materials, especially the material which is difficult to handle.
Advantages and Features
1. Large capacity than normal vibrating screen;
2. The accurate is six stage separation, and screening efficiency is highly from 95% to 99%
3. Using silicone rubber ball, ultrasonic device such as efficient clean network system.
4. Without blocking mesh net,Sealed dust and safe operation;
5. The acceleration is 4.5 times lower than the vibrating screen,so the screening parts life increase and reduce maintenance;
6. With low noise which is less then 75 db. Optimize the weight balance, foundation dynamic load is low.
Application
1. Mainly used for screening, filtering, grading and removing impurity for all kinds of powder, particle, and liquid.
2. Mainly suitable materials: chemical, medical powder and particle, coating, pigment, cosmetic, grease, resin, ceramic sauce, slurry, quicklime, fireproofing powder, metallurgy powder, starch,flour, rice flour, carbon powder, graphite powder, manganese powder, sewage, waste oil, dung, etc.
Technical Parameters
Model | Screen Surface | Layer No. | Feeding Size | Amplitude (mm) | Frequency (r/min) | Power (kW) | |
width | length | ||||||
PXZS1224 | 1200mm | 2400mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1230 | 1200mm | 3000mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1236 | 1200mm | 3600mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1524 | 1500mm | 2400mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1530 | 1500mm | 3000mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1536 | 1500mm | 3600mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1830 | 1800mm | 3000mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS1836 | 1800mm | 3600mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS1840 | 1800mm | 4000mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS2036 | 2000mm | 3600mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS2040 | 2000mm | 4000mm | 1-4 | <75mm | 75-90 | 750 | 11 |
PXZS2050 | 2000mm | 5000mm | 1-4 | <75mm | 75-90 | 750 | 11 |
Note: The parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |