Dust Free Type Gyratory Screen Separator 0~80m3/h Capacity 15kw Power
Introduction
Gyratory screen utilizes a gyratory-reciprocating motion, gyratory screener gives a combination of actions to the materials as it passes along the screen surface. It begins with a horizontal circular motion at the feed end, gradually changes to changes to elliptical motion at the center, and finally to a straight-line motion at the discharge end, keeping the material in constant contact with the screen surface without deterioration. It is developed based on foreign advanced screening technology. The device has the characteristics of large output, high screening precision, convenient installation and operation, low noise, no pollution, easy maintenance and so on.
Advantages and Features
1. Automatic cleaning- Bouncing balls keep screen openings clean and maintain efficiency and capacity.
2. Screen long service life- No vertical component avoid the impact and damage of material to screen.
3. Full utilization of screen surface- Gyratory reciprocating motion ensures material constantly contact with screen surface.
4. Environmentally Friendly- Fully enclosed structure,no dust pollution,improve working conditions for operators as well.
5. Top-class design -Mature technology, easy installation and maintenance, convenient and quick screen replacement.
7. Quick Screen Changes-Quick release device is provided to take down the net rack and replace the screen rapidly.
8. Various sieving solution- Gyratory screen allows separations with openings from 0.5mm to 325mm.
Technical Parameters
Model | Screen Surface | Layer No. | Feeding Size | Amplitude (mm) | Frequency (r/min) | Power (kW) | |
width | length | ||||||
PXZS1224 | 1200mm | 2400mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1230 | 1200mm | 3000mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1236 | 1200mm | 3600mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1524 | 1500mm | 2400mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1530 | 1500mm | 3000mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1536 | 1500mm | 3600mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
PXZS1830 | 1800mm | 3000mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS1836 | 1800mm | 3600mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS1840 | 1800mm | 4000mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS2036 | 2000mm | 3600mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
PXZS2040 | 2000mm | 4000mm | 1-4 | <75mm | 75-90 | 750 | 11 |
PXZS2050 | 2000mm | 5000mm | 1-4 | <75mm | 75-90 | 750 | 11 |
Note: The parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |