Contactless Electric Power Tester With LED Three Phase Indicator

VICTOR850C Non-Contact Three Phase Indicator cable tracker Rotation Phase Sequence Tester with LED Light Indicator

Introduction

This non-contact Phase Detector breakthrough the traditional method of phase detection. It also have the functions of live wire examination, power inspection, phase deficiency judgment, breakpoints finding, breakpoints positioning.

Technical Specification

• Power Supply: 3V DC (R6P×2 manganese alloy batteries, continuously working for 70 hours)
• Performance-guarantee Range: AC70-1000V, 45/65Hz (sine wave, continuously), static induction.
• Diameter of wires can be clamped: ø1.6mm-ø16mm
• Display:

【Positive Phase Sequence】

The four phase-sequence lamps blink in order (clockwise).

【Negative Phase Sequence】

The four phase-sequence lamps blink in order (counterclockwise).

【Line-voltage Indication】L1,L2,L3 lamp light up.

【Default Phase】L1/L2/L3 lamp is off.

【Open Circuit】L1/L2/L3 lamp is off.

Buzzer:

【Positive Phase Sequence】The buzzer sounds intermittently.

【Negative Phase Sequence】The buzzer sounds continuously.

Power Indication:

Power ON lamp: lights up (Power ON), LOW BATTERY lamp light up.

• Magnetic force: Instrument base plate is provided with a magnet, suction hanging in the electrical box, can withstand 800g quality.
• Auto Power Off: The power will be turned off automatically if the instrument remains idle for 5 minutes after the power is turned on.
• Dimension: 70W×75H×30D (mm)
• Cable Length: 0.6m
• Weight: 200g
• Working Temperature and Humidity: -10℃-55℃; below 80%Rh
• Storage Temperature and Humidity: -20℃-60℃; below 90%Rh
• Maximum Rated Voltage: AC1000V
• Dielectric Strength: 5.4kVrms
• Maximum Rated Power: 300mVA

Technical Data